Mitsubishi Electric EHSD-MED Service Manual page 76

DISASSEMBLY PROCEDURE
15. How to remove the drain pan <ER** series>
(1) Remove the front panel. (Refer to Procedure 1.)
(2) Disconnect all the field piping.
(3) Remove the screw on the manometer cover, then hold
the sides of the manometer cover, disengage the 2 claws,
and remove the manometer with cover. (Photo 15-1)
(4) Remove the saddle band and the rubber tube by
removing the 2 screws on the saddle band. (Photo 15-2)
• Reuse the removed saddle band, rubber tube and screws
fixing the saddle band and rubber tube.
(5) Remove the 3 screws each on the cover plate. (Photos
15-3 and 15-4)
(6) <ERS* series>
Remove the cover plate from the base assy. (Photo 15-5)
<ERPX series>
Remove the 2 cover plates from the base assy. (Photo 15-6)
Photo 15-3 (ERS* series)
Cover plate
Screws
Photo 15-5 (ERS* series)
Cover plate
OCH712C
Photo 15-1
Manometer
Manometer
cover
Photo 15-2 (ERS* series)
Photo 15-4 (ERPX series)
Photo 15-6 (ERPX series)
Base assy
76
PHOTOS/ FIGURES
Claw
Strainer valve
Screws
Saddle
Screws
band
Rubber
tube
Cover plate
Screws
Cover plate
Claw
Screw
Strainer valve stay
Strainer valve holder
Screws
Base assy