Table of Contents
Advertisement
Available languages
Available languages
Place a suitably sized container under the ma-
chine spout.
To start the descaling procedure, press the:
"
"
LUNGO
WEAK
keys together over 3 seconds. The machine will
emit a beep.
Press the Coffee 8 oz.
caling cycle.
During the cycle, the on/off
key will blink.
To increase the effect of the descaling product,
the machine will automatically pause a long
time.
MAINTENANCE AND CLEANING
and CAPPUCCINO
key to start the des-
and Coffee 8 oz.
When the tank is empty, the cycle will be tem-
porarily interrupted and the on/off
warning and Coffee 8 oz.
steady.
The machine will emit a beeping sound.
Finally, remove the water tank, rinse it with fresh
drinking water and fill it to the max. level.
Fit the water tank back into place in the ma-
chine.
Place a suitably sized container under the ma-
chine spout.
Press the Coffee 8 oz.
ing cycle.
When no water is left in the water tank, repeat
the operation by filling up the water tank again.
At the end of rinsing procedure, the machine
will emit a long beeping sound and will be ready
again to brew.
Wipe the machine with a damp cloth to remove
any splash of the descaling solution.
Then, the descaling process will be over.
EN
, descaling
key will remain
key to start the rins-
17
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the CLASSY PLUS and is the answer not in the manual?
Questions and answers
The orange light for water tank removed is on but the water tank is in place. When I turn on and off it is not on but when I try and brew the light comes back on and will not brew.
The orange light for the water tank on the LAVAZZA CLASSY PLUS may be on even when the water tank is in place due to the following reasons:
1. No water in the tank – Ensure the tank is filled with fresh drinking water.
2. Tank not inserted correctly – Remove and correctly reinsert the water tank.
3. No water flow in the hydraulic circuit – Disconnect the power cord, wait 10 seconds, reconnect it, and turn the machine on. Wait for the heating cycle to complete, as the machine will automatically attempt to fill the hydraulic circuit.
If the issue persists, contact Lavazza Customer Service.
This answer is automatically generated