Chapter 1. Foreword 1-1 To; Before Use - Hitachi EH-150 Applications Manual

Chapter 1 Foreword
Thank you for using the Hitachi EH-150 Programmable Controller series (hereinafter known as the PLC.)
This manual explains how to use the CPU link module (hereinafter known as the EH-LNK) with the Hitachi EH-150
Programmable Controller. Read this manual thoroughly and use if when performing installation operations,
maintenance checks and other procedures. The following documentation related to PLC is also available and should
be used together with this manual.
Items
Main system of EH-150
Programming Software
CPU Link module
* The end of the manual number will differ in accordance with upgraded versions, etc.
Note that the contents of this manual are subject to amendment without prior notice.
1.1

Before use

Great care has been taken in the manufacture of this product, but it is advised that the following points are
checked immediately after purchase.
1. Is the model the same one that you ordered?
2. Has the product been damaged in any way?
3. Are any of the accessories listed in table 1.2 missing?
Contact your dealer in the event of any defects being discovered.
No. Products name
CPU Link
1
Module
Insulated cable
2
connector tube
Instruction
3
manual
* Attach the insulated cable connector tube in accordance with the instructions provided in section 5.1.5
(Using the Insulated Cable Connector Tube Supplied.)
Table 1.1 List of Explanatory Documentation
Name of documentation
EH-150 Application Manual
LADDER EDITOR ( for MS-DOS )
LADDER EDITOR for Windows®(Windows®95/98/NT4)
CPU Link module (EH-LNK) Application Manual
Table 1.2 List of Accessories Supplied with the EH-LNK
Model number
EH-LNK
---
NJI-376(X)
Outlook
1-1
Chapter 1. Foreword
Number of Manual
NJI-280*
NJI-206/299
NB-325
NJI-381
Pcs Remarks
1
2
1