Sealey MK79 Instructions

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Wear
Refer to
protective
instructions
gloves
1. SAFETY
Only use on firm, level, unobstructed surfaces which are capable of supporting the stand and wheels.
9
DO NOT overload.
8
Always load evenly with the centre of gravity of the load as near the centre as possible.
9
Apply the brakes before commencing work.
9
DO NOT stand/ride on the stand, or allow others to do so.
8
Replace or repair damaged parts. Use only recommended parts. Unauthorised parts may be dangerous and will invalidate the warranty.
9
WARNING! Failure to comply with these instructions may result in loss of load, damage to the stand or other property and/or personal
‰
injury.
WARNING! The warnings, cautions and instructions discussed in this instruction manual cannot cover all possible conditions
‰
and situations that may occur. It must be understood that common sense and caution are factors which cannot be built into this
product, but must be applied by the operator.
2. INTRODUCTION
Compact design but handles the larger bonnets, tailgates etc. Ideal for doors, bonnets, bumpers, wings and spoilers. Fully ..........................
adjustable, rotates full 180°. Adjustable and rotating bars make this stand suitable for almost all panel types. Portable for .............................
easy manoeuvring of application from preparation to spray booth.
3. SPECIFICATION
Model No ......................................................................MK79
Base dimensions ...............................................900 x 710mm
Overall arm width ..................................................... 1550mm
Max capacity .................................................................. 40kg
4. ASSEMBLY
Assemble panel stand according to the parts diagram attached.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice. Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
ROTATING PANEL REPAIR STAND
MODEL NO:
Wear
protective
footwear
01284 703534
Original Language Version
MK79
sales@sealey.co.uk www.sealey.co.uk
MK79 Issue 1 11/12/19