Related Manuals for Plum ecoSTER 200
Summary of Contents for Plum ecoSTER 200
- Page 1 Room panel ecoSTER 200 HARDWARE VERSION 2 FOR ECOMAX CONTROLLERS OPERATION AND MAINTENANCE MANUAL ISSUE_EN: 1.1 APPLICABLE TO SOFTWARE: v10.XX.XXX 11-2015...
-
Page 3: Table Of Contents
8.6.1 Connection to ecoMAXX800 R2,T2 and ecoMAX800 P1,P2,D1,D2 ........11 SAFETY ..............4 8.6.2 Connection to ecoMAXX800 R3,T3 and ecoMAX800 P3,D3 ..........12 PURPOSE ............. 4 8.6.3 Connection to ecoMAX850 P1 ....12 INFORMATION ABOUT DOCUMENTATION ..4 8.6.4 Connection to ecoMAX850 P2,R2,D2 ..13 STORAGE OF DOCUMENTATION ...... -
Page 4: Safety
4. Storage of documentation 1. Safety This assembly and operation manual, as well other applicable documentation, should be stored diligently, so that it was available at any time. In the case of moving selling device, attached Incorrect electrical connection of the room documentation should be forwarded to the panel with ecoMAX regulator can cause new user/owner. -
Page 5: Operating Manual
Push the button shortly to display menu. 7. Operating manual Type of displayed menu will be according to currently displayed main screen. Switching the panel on example, if you select the room thermostat 1 To switch the panel on, press TOUCH&PLAY on the main screen, entering to menu will button. -
Page 6: Operation Modes
6. Currently selected profile. Screen for editing the duration of this mode 7. Graphic presentation of programmed will be displayed. After setting the required time zones (schedule). duration and confirming by pushing the 8. Number of thermostat for which this button, the "Output"... -
Page 7: Holiday Mode
set temperature value; the mode duration 7.6.8 Anti-freeze mode time edition window will be displayed. After In this mode, the regulator works with setting the required duration and confirming constant preset temperature, set in the by pushing the button, the Party operation following parameter: mode activated;... -
Page 8: Preset Room Temperature
Preset anti-freeze temperature is set in: Schedule MENU → Temperature settings → Anti- freeze temperature 7.10 ecoMAX boiler regulator menu In order to display the ecoMAX (2) boiler regulator main screen, turn the button right when thermostat main screen 1. Preset temperature: comfort displayed. -
Page 9: Thermostat Settings
7.11.2 Thermostat settings boiler regulator clock, and therefore both clocks have to be set on the same hour. This parameter enables or disables operation of particular ecoSTER200 thermostats. Programmed schedule works according to the scoSTER200 panel Enabling or disabling thermostat 2 clock. -
Page 10: Storage And Transportation Conditions
Drill holes in a wall. If a wall is made of Storage and transportation bricks, use rawlplugs. Screw in the screws. conditions Panel cannot be directly exposed to weather conditions, i.e. rain and solar radiation. Storage transportation temperature should be within a range of -15…65 °C. During transportation, the panel cannot be exposed to vibrations which are higher than typical for normal transporting conditions. -
Page 11: Ecomax800 P1,P2,D1,D2
The length of uninsulated tip of the cable 8.6.1 Connection to ecoMAXX800 R2,T2 should be within 8÷10mm. Cable is inserted and ecoMAX800 P1,P2,D1,D2 into a terminal by pushing a button on this terminal with a flat screwdriver, inserting the cable and releasing the button. Below are the wiring scheme thermostats with room sensors 2 and 3 type CT7 and the way VCC panel power module + 5V or + 12V... -
Page 12: Connection To Ecomaxx800 R2,T2 And
8.6.2 Connection to ecoMAXX800 R3,T3 8.6.3 Connection to ecoMAX850 P1 and ecoMAX800 P3,D3... -
Page 13: Connection To Ecomax850 P2,R2,D2
8.6.4 Connection ecoMAX850 P2,R2,D2 8.6.5 Connection ecoMAX860 P1,P2,D1,D2... -
Page 14: Assembling Sensors Of Thermostat And
In order to guarantee a maximum operation Assembling sensors of thermostat efficiency regulator, follow 2 and 3 recommendations concerning place After connecting two additional temperature sensor assembly: sensors, ecoSTER200 room panel 1. Sensors should be assembled on a provides independent temperature regulation height app. - Page 16 Wspólna 19, Ignatki 16-001 Kleosin, Poland phone +48 85 749-70-00 fax +48 85 749-70-14 plum@plum.pl www.plum.pl www.plumelectronics.eu...
Need help?
Do you have a question about the ecoSTER 200 and is the answer not in the manual?
Questions and answers