Enclosure Version - Siemens Pointek CLS100 Operating Instructions Manual

Symbols
3.3

Enclosure version

① Ground
② mA current loop (+V or -V)
③ mA current loop (-V or +V)
④ cable shield connection
⑤ solid state switch/relay
relay available only on Pointek CLS100 fully synthetic enclosure version
*
Note
The mA current loop can be wired in either polarity to determine high or low level operation
as shown in the examples beginning on Non-intrinsically-safe version (Page 11). The cable
shield should be connected to terminal 3 on the terminal block along with the provided
ground wire.
Pointek CLS100
Compact Operating Instructions, 05/2021, A5E32146158-AB
Solid state switch, normally open unpowered.
V supply / mA 2-wire current loop detection 4/20 or 20/4 mA
Terminal Operation
*
Cable Equivalent
Red wire
Black wire
Cable shield
White wire
Connecting
3.3 Enclosure version
9