Download
Share
Print this page
  1. Manuals
  2. Brands
  3. LuxaFlex Manuals
  4. Window Blinds
  5. Timber
  6. Product manual

LuxaFlex Timber Product Manual

Venetian blinds
Hide thumbs

Advertisement

Quick Links

Download this manual
Timber & Woodmates
Venetian Blinds
Product Manual

Advertisement

loading
Need help?

Need help?

Do you have a question about the Timber and is the answer not in the manual?

Questions and answers

Related Manuals for LuxaFlex Timber

Summary of Contents for LuxaFlex Timber

  • Page 1 Timber & Woodmates Venetian Blinds Product Manual...
  • Page 2 Maximum Area 5.8m² 3.6m² If frequently raised & lowered 4m² 4.0m² Shade Stack .08 x Drop + 67 .08 x Drop + 67 Height SUPPLIER INFO Timber Venetian Blind material is sourced from Vinawood in Vietnam. P a g e...
  • Page 3 REDUCING LIGHT GAPS IN CORNERS, BAYS & BUTTING BLINDS The following codes should be used to indicate that slats should be extended 5mm past the headrail on the side indicated. This will reduce light gaps between blinds. OIE = extend slats 5mm on the idle end of the blind (i.e. opposite end to controls) OCE = extend slats 5mm on the control end of the blind OBE = extend slats 5mm on both ends The projection of the headrail including brackets is 60mm.

  • Page 4: Size Limitations

    MULTIPLE BLINDS ON ONE HEADRAIL NOTE: If you require a separate tilter for each blind, it is cheaper, easier to manufacture and easier to fit separate blinds. There is no advantage in ordering multiple blinds on a common headrail. ON ORDER FORM YOU MUST SPECIFY: •...
  • Page 5 SIZING STANDARD FACE BLINDS Top View SF STADARD REVEAL BLINDS P a g e...
  • Page 6 MULTIPLE BUTTING BLINDS MULTIPLE BLINDS P a g e...
  • Page 7 OPTIONS STANDARD BLIND • All blinds fitted with colour co-ordinating valance and bottom rail • Control lengths supplied as per price grid OPTIONS Brass plated hold down brackets. Add per pair • • Pelmet covers on back of headbox. Add per metre •...
  • Page 8 SPECIALTY SHAPES FIXED SPECIALTY SHAPES - 50MM ONLY Special Note: Deduct 10mm on overall width and drop when trimming template to size, for reveal fit. T = Tilt location *No fabric tape available *50mm slat only P a g e...
  • Page 9 FIXED SPECIALTY SHAPES - 50MM ONLY P a g e...
  • Page 10 FIXED SPECIALTY SHAPES - 50MM ONLY Templates Make the Difference Templates are required with all specialty shaped orders. Easy-to-use guidelines for preparing templates appear on this page. NOTE: ONE TEMPLATE REQUIRED FOR EACH WINDOW. 10 | P a g e...
  • Page 11 FIVE STEPS TO AN ACCURATE TEMPLATE 1. Tape cardboard (thin sheet or corrugated) or heavy wrapping paper over the window opening, allowing plenty of overlap. Use paper that has never been folded; a template can have no folds or creases. 2.

  • Page 12: Bracket Options

    BRACKET OPTIONS 12 | P a g e...
  • Page 13 PELMET OPTIONS 13 | P a g e...
  • Page 14 PELMET CODES 14 | P a g e...
  • Page 15 15 | P a g e...
  • Page 16 REDUCING LIGHT GAPS IN CORNERS, BAYS & BUTTING BLINDS The following codes should be used to indicate that slats should be extended 5mm past the headrail, on the side indicated. This will reduce light gaps between blinds. There is a small surcharge for this option (see price grids).

  • Page 17: Installation Instructions

    INSTALLATION INSTRUCTIONS MATERIALS & TOOLS Each Venetian Blind ordered should include: • 1 left and 1 right hand hinged cover mounting bracket • Support bracket(s) if needed • 2 screws for each bracket (20mm x 6# Panhead) • 1 pair hold down brackets and pins (if ordered) TOOLS REQUIRED •...
  • Page 18 FACE FIT First, measure the blind and mark on the face or architrave where to attach the two installation brackets. NOTE: 5mm past each end of headrail. Attach the installation brackets to the wall or architrave using 2 screws (20mm x 6# Panhead), (25mm x 6# Panhead for render fix).
  • Page 19 ATTACHING THE PELMET If face fit, first attach returns by using the snap on brackets provided. Timber and Woodmates Venetian Blind Pelmets have magnets attached to the back of the pelmet which snaps onto the head rail.

  • Page 20: Operation

    HOLD DOWN BRACKETS(OPTIONAL) - TIMBER VENETIANS BLINDS Hold-down brackets are used to keep the bottom of the blind from swaying when mounted on doors or exposed to the wind. The hold-down brackets are inside or outside mounted at the bottom of the window opening. With the blind fully lowered, place the hold-down brackets onto the pins on the end of the bottom rail and mark mounting hole locations.

This manual is also suitable for:

Woodmates