Advertisement
Installation Reference
Installing the Outdoor Optical Splitter
4 4
Optional: pole-mounting
a
Install the pole assembly on the pole.
Loosen the screw on the hold hoop.
Install the pole assembly on the pole.
Hold hoop
Assembly
Tighten the
screw on the
hold hoop.
5
Route in and fix cables.
a
Determine the holes through which fibers are routed in and remove the hole blocks.
Connected to the fiber outlet
on the main OAU 2A.
Connected to the fiber outlet
on the standby OAU 2A.
Complete installation of the pole
assembly.
Hole blocks
Connected to the fiber outlet
on the customer equipment.
Fix the case on the pole assembly and tighten the lower hold hoop.
b
Tighten the
Fix the upper end of the case and then the lower end.
hold hoop.
Partially
tighten the
hold hoop.
b
Fix hose clamps on outdoor fibers.
Hooks to fix
hose clamps
Outdoor fiber trough
21
Tighten the
hold hoop.
Hose clamp
Advertisement
