Horizontal Left Installations - Mitsubishi Electric M-SERIES Installation Manual

Fan assembly rotation not required

10.3. Horizontal left installations

For horizontal left installation the drain pan will need to be moved to the opposite side of the coil. This can
be done by moving the two brackets and drain pan to the left of the coil. This way, the condensate that
formed on the coil will fall in the drain pan. Also, the appropriate knockouts for the drains will need to be
removed once the drain pan is in its correct position. In addition to relocating the side drain pan, the fan
assembly will also need to be removed rotated 180° and reinstalled. The motor has to be closest to the
ground. The two clear plastic tubes included in the accessory bag will also need to be attached to the top
drain pan. See instructions below.
Directions for rotating fan for Horizontal Left Installation:
Step. 1 Remove the panel marked "FILTER".
© 2020 Mitsubishi Electric US, Inc.
SVZ-KP12,18, 24, 30, 36NA
⑤ Electrical Knockouts
⑧ Auxiliary Drain Pan
⑨ Primary Drain 3/4" FPT
⑩ Airflow
Horizontal Right
22 Specifications are subject to change without notice.