Table of Contents
Advertisement
8.2
Preset sequence no.x
Siemens Building Technologies
Fire Safety & Security Products
All inactive
The All inactive button deselects all the cameras. This disables all cameras for the
monitor cycle.
This also applies to the cameras that have been programmed on the other index
cards.
Starting a monitor cycle using a keyboard
Starting and stopping a monitor cycle requires the Cycle start, Cycle stop and
Input/preselect keys on the keyboard. These keys are programmed in the
Programming keyboards dialogue screen (see section 6.4).
To start a monitor cycle:
1.
Enter the monitor number
2.
Press the Cycle start key
To stop a monitor cycle:
1.
Enter the monitor number
2.
Press the Cycle stop key
Higher priority image switching also stops the sequence
Alternatively, it is also possible to permanently allocate the Cycle start and Cycle
stop keys to a monitor. Entry of the monitor number is not then required.
Fig. 48
Preset sequence no.x
In a preset sequence, it is possible to program the order of switching at will, e.g. 4-
1-15-12-13. A preset sequence includes no more than 32 cameras, whereas a
monitor cycle can include all the cameras in the system.
If you wish to initiate a monitor cycle, click the Cancel button to return to the screen
where you can select the appropriate monitor.
Automatic picture cycle
63
06.2008
Advertisement
Table of Contents
