HIKVISION DS-K4T100 Manual

DS-K4T100 Electric Bolt Connect to
Title:
Access Control Terminal
Product: Access Control Device
DS-K4T100 Electric Bolt Connect to Access Control

Preparation

Connecting electric lock to access control terminal is mainly applied to open the door for exiting. For
electric lock and access control terminal in this document, please check the table below:
Note
This document is simply used to guide users how to wire correctly and ensure access control terminal can
control locks.
The access control terminal model in this document is DS-K1T201MF-C.
Notice
1. Please cut off power supply before wiring;
2. Please check interfaces of electric lock in following picture;
3. Correspondingly, there are exit button interfaces in DS-K1T200/201/802/804/500/501 series access
control terminal; we will take DS-K1T201F-C terminal as an example:
Version:
Page:
Terminal
Magnetic Lock
DS-K4T100
v1.0 Date: 3/19/2018
1 of 3
Access Control Terminal
DS-K1T105, DS-K1T200/201
DS-K1T802, DS-K1T804
DS-K1T500/501
Color Description
Red 12V
Black
GND
Green
COM
Yellow
NC
Blue
NO
Interface Color
NC White/Purple
COM White/Yellow
SENSOR Yellow/Gray