HIKVISION DS-K4T100 Manual

DS-K4T100 Electric Lock Connect to
Title: DS-K2600&DS-K2800 serires Access
Controller
Product: Access Control Device
DS-K4T100 Electric Lock Connect to DS-K2600&DS-
Preparation
Connecting electric lock to access controller is mainly applied to open the door for exiting. For electric
lock and access controller in this document, please check the table below:
Note
This document is simply used to guide users how to wire correctly and ensure access controllers can
control locks.
The access controller model in this document is DS-K2604 & DS-K2804.
Part 1 is mainly for electric lock wiring, and Part 2 and Part 3 are mainly for the situation that users could
get the door status on iVMS-4200 Client.
Notice
1. Please cut off power supply before wiring;
2. Please check interfaces of electric lock in following picture;
3. Correspondingly, there are lock and door magnetic interfaces in DS-K2800 & DS-K2600 series
access controllers, as pictures show:
Note: means lock interface;
Access Controller
DS-K2801
Version:
Page:
K2800 serires Access Controller
Magnetic Lock
DS-K4T100
means door magnetic interface;
v1.0 Date: 3/19/2018
1 of 10
Access Controller
DS-K2601, DS-K2602, DS-K2604
DS-K2801, DS-K2802, DS-K2804
Color Description
Red 12V
Black
GND
Green
COM
Yellow
NC
Blue
NO
Interface