Panasonic AU-EVA1 Manual page 3

Hide thumbs Also See for AU-EVA1:

Setting up a RCPv2 controller using the default conﬁguration "Panasonic AU-EVA1"

Please follow these instructions if you have a RCPv2 and want to use it with the Panasonic AU-EVA1

camera.

If you RCPv2 have been shipped preconﬁgured with the "Panasonic AU-EVA1" conﬁguration please go to

section "Conﬁrm Connection"

If you have a RCPv2 and want to use the default conﬁguration "Panasonic AU-EVA1" please follow these

steps

Download and install the Firmware Updater Application (https://www.skaarhoj.com/support/ﬁrmware-

updater/)

Connect the RCPv2 with the USB programming cable (if you are on Windows and have multiple com

ports available please see the section "Port selection on Windows" in the Installation and Operation

Manual (https://www.skaarhoj.com/support/manuals/)

Press "Online Conﬁguration" in the Firmware Application

SKAARHOJ DEVICE CORES