Panasonic AU-EVA1 Manual page 15

SKAARHOJ DEVICE CORES
Example:
Limiting the Device Core option to connect to only 1 camera could look like this device configuration
code: "D0:0=1" where the general form would be "Dx:y=z" where "x" is the number of the device core as
installed on the controller (starting with zero for the first device core), "y" the index number and "z" the
value for that index.
To confirm that a device configuration is in fact detected by the controller, please check it out on the serial
monitor where it will be mentioned:
15