Component Replacement Procedure - Sharp KS-18EV Service Manual

COMPONENT REPLACEMENT PROCEDURE

1. Upside down the rice cooker.
2. Remove the screw holding the cord reel ass'y.
3. Remove the screw holding the contact plate cover from the cord reel ass'y.
4. Disconnect lead wires from cord reel ass'y.
5. Now the cord reel ass'y is free.
Screw
Cord reel ass'y
Bottom cover
Rice cooker
1. Remove the cord reel assembly in accordance with "REMOVE OF CORD REEL ASSEMBLY".
2. Remove the screw holding the body from bottom cover.
3. Insert the fl at type screwdriver into the gap between the bottom cover and body, to pry the bottom cover
out of body.
4. Now the bottom cover is free.
Bottom cover
REMOVE OF CORD REEL ASSEMBLY
Place a blanket for protection
REMOVE OF BOTTOM COVER
Body
Screw
With this claw being pressed inward
Earth lead wire
Fig. 1
Body
Flat type screwdriver
6
Screw
Contact plate cover
Lead wire
Fig. 2