Sharp VH-25 Series Operator's Manual page 32

b. Lubrication of sliding surfaces of work table, saddle, base and gib :
( 20VSG, 20VGA, 20VHS, 20VHA ) ( 20VS, 20VA, 20VB, 20VC )
Position
Sliding surface of work table,
( A ) Inlet
saddle, Base Gib and feed
Fig.31
c. Gear Housing Lubrication (20VSG, 20VGA, 20VHS, 20VHA )
Position Lubricated Parts
( A ) Inlet Gears Inside
( B ) Outlet Gear Housing
Fig.32
Lubricated Parts
leadscrews
KUO KUANG R-68
GULF WAY 52
VACTRA 2
ESSO FBIS K53
SHELL TONNA 33
HEAVY MEDIUM
Lubricant
KUO KUANG R-68
ESSO FBIS K53
VACTRA 2
GULF WAY 52
SHELL TONNA 33
Lubricant
OPERATOR'S MANUAL
Frequency Q'ty
3-5 times daily by Filled up to
pulling 3 times upper
each leveL
Frequency Q'ty
First oil
change at 3 Filled up to
months after between H-L
installation in oil window
Then, every (C) (1/2
other 6 height)
months
P 29 / 57