Sealey VSE5066 Instructions

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions
and maintained properly, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT
CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL
INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to Instruction
Manual
1. SAFETY
  WARNING! Wear approved eye protection. Wear appropriate Personal Protective Equipment. A full range of Personal Protective Equipment
is available from your Sealey dealer.
 WARNING! Ensure that Health & Safety, Local Authority Regulations and general workshop practice Regulations are adhered to when
using tools.
  DO NOT use tools if damaged.
 Maintain tools to ensure that they are in an adequate condition for safe use and optimum performance.
 Ensure that a vehicle that has been raised by a jack is adequately supported. Use axle stands.
 Wear suitable clothing to avoid snagging. DO NOT wear jewellery. Tie back long hair.
 Account for all tools, parts and components being used. DO NOT leave these in or near the engine. Return tools to suitable storage after
use.
IMPORTANT! These Instructions are provided as a guide only. Always refer to the vehicle manufactures' service instructions or a
proprietary manual to establish the correct procedure and data.
 W ARNING! The warnings, cautions and instructions in this manual cannot cover all possible conditions and situations. The Operator / user

must apply caution and common sense (good practical sense).
 When timing an engine, always prevent the engine from being turned over. Use a notice and/or inhibit the engine.
 W ARNING! Incorrect or out of phase camshaft timing can result in contact between the valve head and the piston crown. This will cause

damage to the engine.
2. INTRODUCTION
This useful time saving tool is designed to assist with the operation when replacing the timing belt on Subaru 2.0 and 2.5 litre engines. For use
on hexagonal camshaft sprocket fixing bolts.
3. APPLICATIONS
Make: Model:
Subaru Forester (05-09)
Forester Turbo (08-13)
Impreza
© Jack Sealey Limited
INSTRUCTIONS FOR:
CAMSHAFT LOCKING TOOL - SUBARU
VSE5066
MODEL NO:
Engine Codes:
2.0: EJ204, EJ205
2.5: EJ205, EJ205, EJ255, EJ257
Original Language Version
VSE5066 Issue: 1 - 16/05/16