Electrolux KGV9539IK User Manual page 23

Problem
You can hear sparking for
a few seconds after the
flame goes out and auto‐
matic re-ignition is per‐
formed.
comes on.
comes on.
comes on.
You can hear a constant
beep noise.
comes on.
comes on.
comes on.
Possible cause
Air currents around the
burner.
Burner cap or crown are
placed incorrectly.
Metal part of the flame
safety device is dirty.
Automatic Switch Off oper‐
ates.
The Child Safety Device
function operates.
The flame does not light up
in 3 attempts.
Burner cap or crown are
placed incorrectly.
Metal part of the flame
safety device is dirty (Refer
to "Care and cleaning").
The electrical connection is
incorrect.
The hob is too hot.
The hob is overheated.
Too many attempts to clear
the warning .
ENGLISH
Remedy
Make sure that air currents
from windows or doors do
not extinguish the flame.
Place burner cap and
crown in correct position.
Refer to "Care and clean‐
ing".
Deactivate the hob and ac‐
tivate it again.
Refer to "Daily use".
To reset the warning
turn off and turn on again
the hob.
When the display function
reappears, after light
animation, touch
lease it and then touch
within 3 seconds. When
you see the warning is
reset.
Disconnect the hob from
the electrical supply. Ask a
qualified electrician to
check the installation.
Wait a few minutes for cool
down the hob. If possible,
put the large cookware on
the rear burners.
Wait for 30 minutes and
follow the same procedure
as if warning appeared.
If the problem persist, con‐
tact an Authorised Service
Centre.
Wait for 15 minutes.
If the problem persist, con‐
tact an Authorised Service
Centre.
23
, re‐