Advertisement
Table 1 Initial Configuration Parameters for Power Supply and Distribution Devices
Device Name
Project Configuration
Quantity
Power Distribution Device Name
Remarks
■Involved □Not involved
Integrated UPS
2
UPS-1/2
N/A
Note: The following device parameters are not all parameters of the devices. Only the parameters that need to be set for the project are listed. Default values will be used for the other parameters so they do not need to be set. To view
other device parameters, see the user manual for the corresponding device.
If voltage/frequency settings for power distribution devices are involved, adjust the voltage and frequency settings based on the local voltage system and check whether the voltage thresholds and frequency hysteresis meet setting
requirements before first operation.
Advertisement
