[8] Take off the separators.
[9] Unscrew the screws (
For LGH-F300RVX-E
Motor
( 3 ) Terminal block parts
[1] Remove the control box cover. → See (2) [1] .
[2] Check that LED4 on the circuit board is OFF, and then
disconnect the connectors (indicated by
power circuit board.
[3] Unscrew the screw (one PT screw 4×8 BS, indicated
by
) and the lock washer (4).
[4] Remove the terminal block with the read wires.
For LGH-F300RVX-E
• Unscrew the screws (one PT screw 4×8 indicated by
and one PPT screw 4×20 indicated by ).
For LGH-F470RVX-E to LGH-F1200RVX-E
• Unscrew the screw (one PPT screw 4×20 indicated by ).
Six PTT screws 5×10, indicated by
Motor fix plate
) from the
), and remove the motor fix plate.
For LGH-F470RVX-E to LGH-F1200RVX-E
Motor
Power circuit board
─ 40 ─
Separator
Motor fix plate
Lead wire
Terminal block