Samsung SHS-P910 Instruction Manual

SHS-P910
Instruction Manual
Convenient Opening of the Door
Simple PUSH PULL motion
Welcome Feature
When user approaches to the
doorlock, its status is automatically
changed to standby for recognition
Manner Feature
Temporarily blocking the sound of
pressing key buttons and opening
door when going in and out
Automatic Card Recognition Feature
Easily open the door by card key
Dual-Authentication Feature
Dual-Authentication Feature with
fingerprints and passcode
Dual lock Feature
Automatically blocking every recognition attempt
when the owner is at home.
Fire Detection Feature
Built-in fire detection sensor
Crime Prevention Feature
When going out and at the attempt of criming,
prevention alarm will be on.
Opening the door from the outside
(passcode)
When the product is purchased, it is set up as the dual
security mode. If you want to change to the normal mode,
refer to 'Dual security mode setting'.
※ Manner Mode
The sound of pressing key button or door opening does not come out if you
press [*] button first before entering passcode.
This function is useful when you enter home silently at night.
1. Dual-security mode
When touching Two buttons randomly When all of the lights in the
[number pad], the lit up, so press the two number keypad show up, enter
light is on the numbers in the the passcode and press [*]
number pad. sequence. button.
2. Normal Mode
When touching [number pad],
Insert passcode first, then press [*] button.
the light is on the number pad.
Passcode must be enter ed when the number k eypad islighted up, so
●
if the lights ar e not on, then touch the [number keypad] and then
Reference
re-enter the passcode.
When the passcode is incorr ectly entered to cancel the input, press the
●
[ ] but ton and star t from the beginning.
If the passcode is incorrectly entered for five times in a row, alarm sound
●
is played 20 times and the operation of doorlock is paused for 3 minutes.
During the operation pause status, "dding" sound is played every 10
seconds and after 3 minutes a long "dding" sound is played. And then
the pause status is automatically disabled.
Opening the door from the outside
(Fingerprint)
Open the locked door from the outside with fingerprints.
Please correctly contact the registered fingerprint to the fingerprint recognition area.
1. Press [Fingerprint Cover Open] 2. Fingerprint is recognized.
button.
BIOMETRICS
When the [Fingerprint Cover Open] When LED light of the fingerprint recognition
panel is on, contact your fingerprint.
button is pressed, fingerprint
After 1 second, the cover of the fingerprint
recognition cover opens.
recognition site is closed. Now you can open
the door by pushing the doorlock handle.
Precautions for Safety
Precautions for safety protect the user's safety and prevent damages
and inconvenience due to accidents. Please read this and use the
Warning product properly.
Do not install or repair the product
●
randomly as you want.
Do not install the product in a location
●
where the gap between the door and
doorframe is more than 5mm.
Cautiously manage the passcode so
●
that other people cannot know it, and
regularly change the number.
Do not operate the product when your
●
hand is wet, and be careful to not let
water, beverages, and other liquid to
get inside the product.
Do not forcibly press or use a sharp
●
tool to hit the but ton.
BIOMETRICS
When you are going out, always
●
check the ensure that the door was
fully locked.
Product Components
Product components may be changed depending on the
installation environment.
BIOMETRICS
Outside of Main Unit
Key Tag 2E A(FOR B2C ONLY)
Manual, Emergency key
'AA'Battery (LR6)
Warning
You must carry or keep at least one
GC68-02024A ED:01
emergency key outside.
Opening the door from the outside
(card, key tag)
Open the door from outside by using a card and a key tag.
Correctly place the card or the key tag that registered on the
card recognition section.
Placing a card
BIOMETRICS
If card key and key tag is not automatically recognized by doorlock, touch
●
the key pad and try again. The door will open.
Reference
Success: ↑DingDongDengDong
Fall: DingDongDingDong
Opening a door from inside
Opening a door
by pushing the inner knob
Success: ↑DingDongDengDong
Fall: DingDongDingDong
Be careful of jamming your hand in use.
●
Caution
Using the remote control
(option)
Press the [OPEN] button on the
remote control.
Closing a door from indoor
When setting the
automatic lock
When setting the
manual lock
Success:↑DingDongDengDong
Fall: DingDongDingDong
Relieve
In the case of you want to check if the door is locked at home, push the
●
relieve button shortly. If the door is locked, red LED light will be on.
Reference
Otherwise, you will see blue LED light is on.
4
Properly fit the battery into the product
●
onto its accurate (+/-) terminals.
When the battery is incorrectly placed
in its direction or charge as displayed
into the battery room, leakage and
breakage may occur, so please be
careful.
When the battery life is ended, replace
●
all the batteries at once, and avoid
using new and used bat teries at the
same time.
When cleaning the product, do not
●
wipe it with water, benzene, or
alcohol, and instead, use a dry cloth.
Replace the batteries to new ones
●
within one week of first hearing the
battery replacement notification alarm.
Mortise
Strike
Strike box
(FOR B2C ONLY)
Inside of Main Unit
Fixation spring for handle shaft
Handle shaft, installation screw
Installation map(FOR B2C ONLY)
The door will be open if you wait 1
second after placing a card or a key
Success :
tag on the card recognition section.
↑
DingDongDeng
Fail :
DingDongDingDong
Use the wireless wall pad
(optional)
When pressing the [Door Open] button
of the wireless wall pad, the locked
status is released.
(It may vary depending on the wireless wall
pad models.)
The door will be locked automatically
after closing the door.
The door will be locked
when pressing [Relieve]
button or [Open] button on
Or
the remote control.
Names and Features (Outside)
Number Keypad
Number Keypad
Turned Off
Touch
Finish button
turn on "MANNER MODE"
Battery exchage
alarm
Bottom part of body outer part
Names and Features (Intside)
Battery cover
Registration button
Relieve button
Names and Features (Mortise)
2
※Registration/setting only works under the condition of door is open.
Initialization(password, card, key tag, remote controller)
Remove all the information stored. Once it is initialized,
password will be set as '1234'.Your need to register your
card and a password again after its initialization.
1. [registration]press button 2. Insert initialization number
Dingdong→DDingDDing
open a battery cover
Dingdongonce
press [registration]button
lights up on number pad,
for 3seconds.
press '4560852580' then [*]
Passcode Registration
Passcode can be registered in 4~12 digits, and only one can
be registered to use.
1. Press the [Register] 2. Register the new passcode.
button.
Dingdong
Open the battery cover and Insert the passcode(4~12digits)
shortly press [register] button. that you want to register, then
press [*] button.
● To prevent theft accidents, it is recommended to use the passcode that
is 6 digits or longer (only 0~9 number s are usable).
Please be careful to manage the passcode so that other people will not
●
Caution
know. Using the same passcode for a long period of time ma y lead to
its exposure, so regularly change the passcode for use.
● Registered passcode cannot be deleted, so r egister a new passcode to
use.
Fingerprint Registration
Maximum of 100 fingerprints can be registered for use.
1. Press the 2. Recognizing the fingerprint that will
[Registration] button be registered
Dingdong
After opening the battery When the LED of fingerprint recognition area is
cover of the inside main part, lighted up, contact the fingerprint that will be
press the [Registration] button registered. When the LED is turned off, lift the finger.
briefly. (Total of 3 authentications)
3. Registration complete 4. Confirming on registration
BIOMETRICS
Dingdong
To complete the fingerprint Press the [Fingerprint Cover Open] button on the
registration, press the outside body to open the fingerprint recognition area
[Fingerprint Cover Open] cover and contact the fingerprint to the fingerprint
button to close the cover. recognition area.
5
Number Keypad
Turned On
Fingerprint recognition cover
BIOMETRICS
Fingerprint cover open button
Card
Recognition Area
Proximity sensor
area
Number key pad
Door was opened
Crime prevention
feature
Re-enter the
Door is locked
Dual locking lamp
External Power Contact Area
Reset button
Insert for spare key
Battery cover opening button
(To open the battery cover,
press the battery cover open button
and pull forward the cover.)
1.5V A A battery
Volume control swich
Mounting with wireless
module (optional)
Automatic/Manual
lock switch
Dead bolt
Latch bolt
Door open sensor
3
- sucess: Dingdongdang
- Fail: Dingdong Dingdongonce
DingDongDeng
DDing
Success :
DingDongDeng
Fail :
DingDongDingDong
Success :
↑ DingDongDeng
Fail :
DingDongDingDong
6