User Responsibility - GE BiliSoft 2.0 Operation Manual

Phototherapy system
Table of Contents

Advertisement

This product will perform properly, when used and cared for as described in the instructions
provided.
This product must be periodically checked. A defective product should not be used. Broken, missing,
plainly worn, distorted or contaminated parts should be replaced immediately.
Should repair or replacement become necessary, Lumitex recommends that a request for service be
made to the nearest GE Healthcare Regional Service Center listed on the back cover. This Product, or
any of its parts, should only be repaired by trained GE Healthcare technicians.
WARNING:
No modification or alteration of this device is allowed.
WARNING:
US Federal law restricts this device to sale by or on the order of a licensed
medical practitioner.
If repairs are made by anyone other than GE Healthcare trained personnel, the user shall be solely
responsible for any malfunction due to:
Improper use
Inadequate maintenance
Improper repair, damage or alteration
To ensure that the BiliSoft 2.0 Phototherapy System provides effective phototherapy treatment:
Read this manual
Pay special attention to WARNINGs and CAUTIONs that appear in this manual
Use the product according to your healthcare provider's instructions
This symbol indicates that the waste of electrical and electronic equipment must not be disposed as
unsorted municipal waste and must be collected separately. Please contact an authorized
representative of the manufacturer for information concerning the proper disposal of your
equipment.

User Responsibility

vii

Advertisement

Table of Contents
loading

Table of Contents