Mitsubishi Electric MELSEC-Q Series User Manual page 39

(3) Setting items
The following explains the setting items on the Data Request screen.
(a) Connection target (character string)
Specify the IP address or host name of the connection target Ethernet module.
Ex.
To specify using the IP address, enter 10. 97. 85. 200.
(b) Command data (character string)
Specify the MC protocol application data using the same character string as the setting for ASCII code
transmission.
For details on the MC protocol, refer to the Reference Manual.
(4) Precautions for use of Data Request
(a) Available communication frame
Application data of the QnA compatible 3E frame command can be specified.
Specification of the 4E or A compatible 1E frame is not allowed.
(b) No. of commands that can be specified at a time
Only one command can be specified at a time.
Continuous specification of more than one command is not allowed.
(c) Remote password unlock/lock (Command: 1630/1631)
Remote password unlock/lock (Command: 1630/1631) is not available.
The remote password to the HTTP port is unlocked in the dialog box, which is displayed in the Web browser
when accessing to a CPU module.
( Page 14, Section 1.5)
CHAPTER 4 VERIFYING OPERATION OF WEB FUNCTION USING SAMPLE SCREEN
4
37