Safety Information Restrictions This product is designed for indoor floor cleaning only, please do not use it outdoors (such as an open-ended terrace), on any surface instead of the ground (such as a sofa), or in a commercial or industrial environment Please do not use the product on any elevated surface without barriers (such as the floor of a lo , an open-ended terrace and the surface of furniture) Please do not use the product when the temperature is higher than 40 or lower...
Page 4
Safety Information physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance(CB) This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of...
Page 5
Safety Information Do not use the cleaner on any burning object (such as a burning cigare e bu ) Do not use the cleaner on plush carpets (the cleaner might not work well on some dark-colored carpets either) Do not use the cleaner to clean hard or sharp objects (such as decoration wastes, glass and nails) Do not carry the cleaner by the cap on the distance laser sensor, the cover on the main unit or the collision buffer...
Page 6
Safety Information Ba ery and Charging WARNING For the purposes of recharging the ba ery, only use the detachable supply Unit Roborock CDZ05RR provided with this appliance Do not arbitrarily dismantle, repair or modify the ba ery or dock charger Please keep the dock charger away from heat (such as heating plates) The ba ery must be removed from the appliance before it is scrapped The appliance must be disconnected from the supply mains when removing the ba ery...
Page 7
Safety Information If the supply cord is damaged, it must be replaced by the manufacturer, its service agentor similarly qualified persons in order to avoid a hazard Please make sure the cleaner is powered off in shipment and original packaging is advised If le unused for a long period, please store the cleaner in a cool and dry place a er having it fully charged and switched off, charge it at least every three months to avoid the ba ery being over discharged...
WEEE Information Correct Disposal of this product . This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources.
Warranty Information The manufacturer provides warranty in accordance with the legislation of the customer's own country of residence, with a minimum of 1 year, starting from the date on which the appliance is sold to the end user. The warranty only covers defects in material or workmanship. The repairs under warranty may only be carried out by an authorized service centre.
Page 10
Thank you for choosing Mi Robot Vacuum. Mi Robot Vacuum is an intelligent cleaner outfi ed with a high-precision laser distance sensor that can create a map of your home and calculate a precise cleaning route as it goes. It works its way methodically around your home and automatically navigates back to the charging dock once it gets the household chore done.
Product Overview Main unit Clean/Power Bu on Press to start cleaning Press and hold to turn the unit on or off Indicator White : power ≥ 50% Yellow : 20% ≤ power < 50% Red : power < 20% Blinking : charging or turning on Blinking red : error Spot/Dock Bu on Bin Release...
Page 12
Product Overview Main unit Dust Bin Filter Bin Clip Bin Cover Wi-Fi Indicator Slow blinking : to be connected Fast blinking : connecting Solid light : Wi-Fi connected Reset Bu on...
Page 13
Product Overview Cliff Sensors Air Outlet Air Outlet Speaker Omnidirectional Wheel Side Brush Main Brush Laser Distance Sensor Brush Guard Collision Buffer Main Wheel Ultrasonic Sensor USB Debug Port...
Installing Connect the power cord, and put the excess cord back in the box. The color of the indicator displays the power level White : ≥50% Yellow : 20% -50% Red : <20% Note: The Unit may inadvertently tug or pull on the power cord if Note: It may not turn on with insufficient power.
Instructions Turning on/off Charging Press and hold the bu on to turn on the unit. The indicator Auto Mode: The Unit will automatically return to the Charging light will go on, and the unit will enter standby mode. When Dock to recharge a er it finishes cleaning Manual Mode: Press the unit is stationary, press and hold the bu on to turn it the bu on...
Page 16
Instructions Local Cleaning Zone 1 cleaned Zone 2 cleaned Press and hold the bu on to activate local cleaning when the unit is awaiting instructions or paused. Use this mode to clean a 1.5×1.5 meter square-shaped area directly around the device. The main unit will automatically return to its original location a erwards and cease working.
Page 17
Instructions Instructions Pausing Scheduled Cleaning Press any bu ons while the unit is operating to pause it. You can schedule a time for the unit to start cleaning from Mi Press the bu on to continue cleaning and press the bu on to Home app.
Instructions Daily Maintenance Charging Dock Main Brush* It is recommended that you clean it once a week 1. Flip the device over and remove the main brush cover by Place the charging dock against the wall and level on the ground. holding down the clip.
Daily Maintenance 2. Open the bin cover at the location indicated by the arrow. Using the Main Brush Cleaner Dust Bin and Filter 3. Empty out the rubbish contained within. * It is recommended that you clean it once per week 1.
Page 20
Daily Maintenance Side Brush* The filter cannot be rinsed without potentially introducing It is recommended that you clean it every month new obstructions which will affect its cleaning effectiveness. 1. Flip the device over and remove the fixed side brush screws. Note: It is recommended that you replace the filter once every three months for optimal cleaning effectiveness.
Page 21
Daily Maintenance Omnidirectional Wheel Unit Sensor It is recommended that you clean it every month 1. Flip the device over and pull up the omnidirectional wheel. 2. Clean hairs, dirt and any other impediments on the wheel Use a so cloth to clean all of the unit's sensors, including; and axle.
Daily Maintenance Specifications Charging Dock Main unit It is recommended that you clean it every month Name Specifications Clean the charging dock's coil with a so cloth. Dimensions 345 345 96mm Firmware Upgrades Ba ery 14.4V/5200mAh lithium ba ery Weight approx.3.8 kg You can upgrade the unit's firmware with your Mi Home app.
Troubleshooting Please refer to the following table when the unit's indicator light is blinking red followed by a voice prompt when it encounters a problem. Fault Prompt Solutions The laser distance sensor is stuck due to an obstruction or foreign object. Error 1: Toggle the orange laser head to confirm that it Remove the obstruction or object;...
Page 24
Troubleshooting The filter may be obstructed. Clean and replace the filter if you are still unable to Error 10: Clean or replace the filter solve the problem. Error 11: Check whether there are any strong magnetic The unit has been activated too close to the virtual wall. Move it to a new location fields present and restart the device at a distance and then activate it.
Page 25
Problem Type Solutions There is not enough power. Try turning the device on again a er recharging it on It can’t turn on the charging dock. Power is not being provided through the charging dock. Confirm that both ends It can’t charge of the charging dock’s power cable are inserted correctly.
Performance failure list of robot vacuum Performance failure list of robot vacuum Name Performance failure Function failure listed in the User Manual Main unit Cannot power on Main brush inoperative, side brush inoperative Charging dock Cannot power the machine Power Cord Cannot power the dock charger EU Declaration of Conformity Hereby we:...
Page 27
EU Declaration of Conformity declare that this DoC is issued under our sole responsibility and that the products: Product description Mi Robot Vacuum and Accessories Type(model) designation(s) SDJQR02RR are in conformity and verified through testing with the provision of the following EU directives: 1.Household and similar electrical appliances-Safety-Part 1: General requirements...
Page 28
EU Declaration of Conformity 1.Electromagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements; Harmonized Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU and the essential requirements of article 6 of Directive 2014/30/EU RED Directive 2014/53/EU 2.Electromagnetic Compatibility (EMC) standard for radio equipment and services;...
Page 29
EU Declaration of Conformity Product description Charging Dock and Accessories Type(model) designation(s) Charging Dock, models: CDZ05RR. are in conformity and verified through testing with the provision of the following EU directives: 1.Household and similar electrical appliances-Safety-Part 1: General requirements Low Voltage Directive 2014/35/EU 2.Household and similar electrical appliances-Safety-Part 2-29: Particular requirements 1.
Page 30
EU Declaration of Conformity Person responsible for making this declaration: Printed name: Rui.Shen Position/Title: Quality Director Signature: Date of issue: Nov 2, 2017...
Page 32
Mi Robot Vacuum Manufactured for : Xiaomi Communications Co., Ltd. Manufactured by : Beijing Roborock Technology Co., Ltd. Model : SDJQR02RR Address : Room 6016, 6017, 6018, Building C, Baosheng Plaza, No. 8, Heiquan Road, Haidian District, Beijing 100192, China...
Need help?
Do you have a question about the Mi Robot Vacuum and is the answer not in the manual?
Questions and answers