luceco Guardian Slimline LFSP10W1B30 Installation & Operating Instructions page 2

6. Once the PIR has been initially set, check all fixings and electrical connections and when safe, reinstate the power.
Note - During the first 48 hours of operation, the PIR may cause the LED floodlight to operate as it self adjusts to the ambient light
level of the installation.
OVERRIDE FACILITY- the PIR sensor is quipped with this function. It allows the PIR sensor to operate in Dusk till Dawn mode.
However it will only activate depending on ambient light level set on the PIR.
To initiate Override Facility turn the power supply OFF/ON/OFF/ON within 2 seconds.
To turn Override Facility OFF, turn the power off for a minimum of 5 seconds, this will reset back to full automatic PIR detection.
Technical Specs
Product Code
Wattage
LFSP10W1B30
10
LFSP10W1B50
10
LFSP20W1B30
20
LFSP20W1B50
20
LFSP30W1B30
30
LFSP30W1B50
30
Typical Lighting Diagrams
Floodlight beam angle (95°)
and light distribution
PIR beam angle (120°)
and range
Note: Based on a recommend 45° downward tilt angle
10W
United Kingdom Warranty
For other territories and for further information, please see www.luceco.uk for details
Products are protected by warranty for a period of 3 years from date of purchase against defects in material and workmanship (unless otherwise stated). Should a
product fail to perform as described within the warranty period it will be repaired or replaced with the same or equivalent product by Luceco, free of charge
provided that you: (1) return the product to us with shipping charge prepaid, (2) provide us with proof of the original date of purchase and (3) quote our return
authorisation number. Repaired or replaced products will be returned to you with shipping charges prepaid.
Replacement products may be refurbished or contain refurbished materials. If in our sole discretion, we are unable to repair or replace a defective product, we will
refund the purchase price of the product. This warranty will not apply if in our judgment, the product fails due to damage in shipment, handling, storage, accident,
abuse or misuse, or if it has been used in a manner not conforming to our product instructions, has been modified in any way, or has any serial number removed or
defaced. Repair or attempted repair will void this warranty. Our maximum liability under the terms of this warranty is limited to the purchase price of the product
covered by the warranty. The warranty is given under English Law. If any part of this warranty is deemed unenforceable (including any provision in which we exclude
our liability to you) the enforceability of any other parts of the warranty will not be affected. These terms do not reduce your statutory rights.
Eventually, you may want to replace this fitting;
Environmental Protection W.E.E.E (Wheelie Bin Symbol)
This symbol is known as the "crossed-out wheelie Bin Symbol". When this symbol is marked on a product or battery, it means that it should not be disposed of
with your general household waste. Some chemicals contained within electrical/electronic products or batteries can be harmful to health and the environment.
Only dispose of electrical/electronic/battery items in separate collection schemes, which cater for the recovery and recycling of materials contained within.
Your co-operation is vital to ensure the success of these schemes and for the protection of the environment.
Tech Help Line
0845 194 7584
UK -
+44 (0)1952 238 100
Non UK -
V2JT-06/2014
Installation & Operating Instructions
Lumen output Efficacy Llm/W
600 60
600 60
1200 60
1200 60
1800 60
1800 60
20W
Supplied by
BG Electrical Ltd
Stafford Park 1 TF3 3BD ENGLAND
Luceco is a registered trade mark of Nexus Industries Ltd.
CCT Voltage
3000 220-240V 50Hz
5000 220-240V 50Hz
3000 220-240V 50Hz
5000 220-240V 50Hz
3000 220-240V 50Hz
5000 220-240V 50Hz
30W
www.luceco.uk
Power factor
>0.8
>0.8
>0.9
>0.9
>0.9
>0.9
Visit our website at