SOLAR GUARDIAN FLOODLIGHT
3.2W WALL LIGHT WITH PIR
NOTE – To comply with regulations, installation must be carried out by suitably
qualified competent person and in accordance with the current IEE Wiring
Regulations (BS7671) and Building Regulations. A copy of the instructions must
be left for the user/maintenance engineer for future reference.
For non-UK, please refer/consult local requirements
ENSURE ELECTRICAL SUPPLY IS DISCONNECTED/
ISOLATED BEFORE COMMENCING INSTALLATION
FEATURES & BENEFITS
• Front and rear facing LED technology provides both functional and
ambient illumination
• 3 working modes, defined overleaf
• Long lasting battery life – 6 hours charge provides illumination
up to 3 nights
SUGGESTED METHOD OF INSTALLATION
1. Select flat surface which receives direct sunlight
2. Drill 3 holes of 6mm at the requested place, keep 163 mm
distance between the 3 holes, 2-4m height from ground
3. Fix 3 rawl plugs into the hole (included)
4. Fix a screw to the lower expansion plug with a little spare
space, insert into the screw groove and fix
5. Straighten the whole lamp and fasten the 2 upper
screws tightly
6. Switch On - fitting will turn on and LEDs will illuminate
for a short period before turning off to normal operation
LEX.RO.07.2017
Installation & Operating Instructions
ACCESSORIES:
(x3)
(x3)
• Perfect for outdoor entrance areas, balconies, paths and decorative
garden lighting
• IP44 rated with durable impact resistant housing
• PIR detection range 2-6 metres
• No wiring, easy & simple installation
1
5
www.luceco.com
6
2
1 – Solar Guardian Housing
2 – 2,3 W Mono-Crystalline
3 – PIR Sensor
3
4 – Front LED Light
5 – Rawl Plug (included)
4
6 – Screw (included)
7 – Rear LED Light
8 – Screw Groove
7
5
8
IP44
1
year
standard
RATED
WARRANTY
Silicon Solar Cell
6
Need help?
Do you have a question about the SOLAR GUARDIAN and is the answer not in the manual?
Questions and answers