luceco Guardian Slimline LFSP10W1B30 Installation & Operating Instructions

Guardian Slimline
LED Floodlights - with PIR
PART CODE: LFSP10W1B30 / LFSP10W1B50 / LFSP20W1B30
/ LFSP20W1B50 / LFSP30W1B30 / LFSP30W1B50
Floodlight
IP65
CRI
>
30,000
RATED
80
HOURS
INSTRUCTIONS FOR NEW INSTALLATIONS
Note - This product range is design for domestic outdoor use.
Not suitable for Interior or commercial use
1.
Turn OFF power supply, ensure all required equipment and
tools are present.
2. The floodlight is intended for exterior use
and is IP65 rated. Select a suitable mounting
position. Recommended mounting heights as follows,
area illuminated is typically mounting height x3.
Wattage Height
10 2.0m - 3.0m
20 2.5m - 4.0m
30 3.0m - 5.0m
3.
With a suitable mounting position identified, securely fix the U
shape mounting bracket to the mounting surface.
Mounting brackets
WALL HERE
For pole or post top
mounting:
Ensure longer bracket
(fitted) is used
Tech Help Line
0845 194 7584
UK -
+44 (0)1952 238 100
Non UK -
V2JT-06/2014
Installation & Operating Instructions
PIR
IP44 3
year
standard
RATED
GUARANTEE
Suggested Halogen Equivalent
100w
200w
300w
WALL
HERE
For wall mounting:
Use shorter bracket
provided
BG Electrical Ltd
Stafford Park 1 TF3 3BD ENGLAND
Luceco is a registered trade mark of Nexus Industries Ltd.
NOTE – To comply with regulations, installation must be carried out
by qualified electrician and in accordance with the current IEE Wiring
Regulations (BS7671) and Building Regulations. A copy of the instructions
must be left for the user/maintenance engineer for future reference.
ENSURE ELECTRICAL SUPPLY IS DISCONNECTED/
ISOLATED BEFORE COMMENCING INSTALLATION
Power Supply
4. The floodlight is supplied pre-wired with 1.0M of H05RN-F
cable, removing the need to open the housing.
5.
Connect the pre-wired cable to the electricity supply,
observing the correct polarity.
LIVE = BROWN
EARTH = GREEN/YELLOW
NEUTRAL = BLUE
PIR Adjustments
The PIR Sensor can be aimed to cover the desired detection
area, and has a maximum range of up to 10 Meters over a
120Deg area. PIR Settings allow the following adjustments
• Time ON = from 10 seconds (+/- 5 seconds) to 8 minutes
(+/- 2 minutes), turn the control clockwise to increase
duration the floodlight will illuminate for when movement is
detected.
• Ambient Light = 2 Lux to 2000Lux, ambient light controls
when the PIR will detect movement, 2000Lux will operate
in most light levels. Turn Anti-Clockwise to increase level of
ambient light for when the PIR will detect movemnt
Guardian Slimline LED Flooldight - PIR
MIN
Supplied by
W
Turn Off
MAX MIN
TIME LUX
Visit our website at
www.luceco.uk