Specifications Of The Bite Block; Transducer Cover - Hitachi MXS2ESLL1 Probe Instruction Manual

MN1-6403 Rev. 1

2-2. Specifications of the bite block

Material
Service life
External dimensions
Remarks: The tolerance for the dimensions is ±10%.
Figure 2 External view of the bite block

2-3. Transducer cover

Use by covering the transducer cover over the insertion portion.
Transducer cover
Remarks
The transducer cover is not included this probe-kit.
DM# 126288 V1
Polyetherimide
Three years
As shown in the figure below.
40
CIVCO Transducer cover
33
Unit: mm
610-933
-4-