Heat Function - Zanussi ZBHC8 User Manual And Installation Instruction

5. Heat Function

Start: press "Heat
on. You can choose "Hi
"Turbo " button, enter the strong working state (running noise of the whole will be a corresponding
increase), after entering the HI
"Turbo " key to exit a strong state, the next will start according to the user's habits, automatic
memory the previous working condition.
Timer: the default time is 2 hours. By pressing "Time-up-down" button to select time duration.
The time can be set form 1 hour to 24 hours. The remaining time will be showed on the LED
display. The time selection will be recorded in memory when it is off, and will resume in your next
usage.
Under the mode, the inter-change of air volume between "Hi
time counting.
Stop: press the "ON/OFF
and the time display will disappear, and the machine stops automatically.
When the heater stops running, the fan will continuously run for around 35 seconds to cool down
the heater.
6. Dry Hot Function
Start: press "Dry
on. You can choose "Hi
"Turbo " button, enter the strong working state (running noise of the whole will be a corresponding
increase), after entering the HI
"Turbo " key to exit a strong state, the next will start according to the user's habits, automatic
memory the previous working condition.
Timer: the default time is 4 hours. By pressing "Time-up-down" button to select time duration.
The time can be set form 1 hour to 24 hours. The remaining time will be showed on the LED
display. The time selection will be recorded in memory when it is off, and will resume in your next
usage.
Under the mode, the inter-change of air volume between "Hi
counting.
Stop: press the "ON/OFF
and the time display will disappear, and the machine stops automatically.
When the heater stops running, the fan will continuously run for around 35 seconds to cool down
the heater.
7. CIR Function
Start: press "CIR " button to start with a "Hi
You can choose "Hi
button, enter the strong working state (running noise of the whole will be a corresponding increase),
after entering the HI
to exit a strong state, the next will start according to the user's habits, automatic memory the previous
working condition.
Timer: the default time is 2 hours. By pressing "Time-up-down" button to select time duration.
The time can be set form 1 hour to 24 hours. The remaining time will be showed on the LED
display. The time selection will be recorded in memory when it is off, and will resume in your next
usage.
Under the mode, the inter-change of air volume between "Hi
time counting.
Stop: press the "ON/OFF
and the time display will disappear, and the machine stops automatically.
:
" button to start with a "Lo
" or "Lo " air volume by continuously press "SPEED" button, Press
icon, LO
" button or pre-set time runs over, "Heat
:
" button to start with a "Lo
" or "Lo " air volume by continuously press "SPEED" button, Press
icon, LO
" button or pre-set time runs over, "Dry
:
" or "Lo " air volume by continuously press "SPEED" button, Press "Turbo
icon, LO lit up at the same time, again according to the "Turbo
" button or pre-set time runs over "CIR
" mode for operation and indication light gets
lit up at the same time, again according to the
" and "Lo
" mode for operation and indication light gets
lit up at the same time, again according to the
" and "Lo
"mode for operation and indication light gets on.
" and "Lo
-10-
" will not affect the
" indication light gets off,
" will not affect the time
" indication light gets off,
" key
" will not affect the
" indication light gets off,
"