Table 7-8 Lan Parameters; Table 7-9 Static Dhcp Parameters - Nokia 7368 Intelligent Services Access Manager ONT Product Manual

Configure a G-2425G-B indoor ONT
Network configuration
Configuring LAN

Table 7-8 LAN parameters

Field
Port Mode
All Ports to Bridge Mode
Port 1 - 4
IPv4 Address
Subnet Mask
DHCP enable
DHCP Start IP Address
DHCP End IP Address
DHCP Lease Time
Primary DNS
Secondary DNS
3
Click Save.
4
Configure the Static DHCP parameters:

Table 7-9 Static DHCP parameters

Field
Static DHCP Entry
MAC Address
IPv4 Address
5
Click Add.
You can also use this panel to delete a Static DHCP MAC address or IPv4 address.
E
ND OF STEPS
August 2020
Issue 4
Description
Select this checkbox to set all ports to Bridge mode.
Select the port mode for each port and click Save:
• Route Mode
• Bridge Mode
Enter the IP address of the ONT.
Enter the subnet mask of the ONT.
Select this checkbox to enable DHCP.
Enter the starting DHCP IP address.
Enter the ending DHCP IP address.
Enter the DHCP lease time (in min).
Enter the primary DNS identifier.
Enter the secondary DNS identifier.
Description
MAC address for the static DHCP
IPv4 address for the static DHCP
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-48293-ACAA-TCZZA
7368 ISAM ONT
93