Configure a G-2425G-B indoor ONT
Configuring the Application
Configuring NTP
7.40
Configuring NTP
1
Click Application NTP from the left pane in the GPON Home Gateway page. The NTP page
displays.
Figure 7-38 NTP page
2
Configure the following parameters:
Table 7-35 NTP parameters
Field
Enable NTP Service
Current Time
Primary Time Server
Secondary Time Server
Third Time Server
Interval Time
Time Zone
134
Description
Select this checkbox to enable the NTP service.
Enter the current local date and time.
Select a time server from the list or select Custom settings and enter the address of the time server.
Select a time server from the list or select Custom settings and enter the address of the time server.
Select a time server from the list or select Custom settings and enter the address of the time server.
Enter the interval at which to get the time from the time server, in seconds.
Select the local time zone from the list.
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-48293-ACAA-TCZZA
7368 ISAM ONT
August 2020
Issue 4