Int_To_Dint(_E) - Mitsubishi Electric MELSEC FX Series Structured Programming Manual

FXCPU Structured Programming Manual
(Application Functions)
5.1.7

INT_TO_DINT(_E)

Outline
This function converts word [signed] data into double word [signed] data, and outputs the data obtained by
conversion.
1. Format
Function name
INT_TO_DINT
INT_TO_DINT_E
*1. Output variable
2. Set data
Variable
EN
Input
variable
_INT (
ENO
Output
variable
*1
In explanation of functions, I/O variables inside ( ) are described.
Explanation of function and operation
This function converts word [signed] data stored in a device specified in
and outputs the data obtained by conversion to a device specified in
1234
Word [signed] data
Cautions
1) Use the function having "_E" in its name to connect a bus.
2) When handling 32-bit data in structured programs, you cannot specify 16-bit devices directly, different
from simple projects. Use labels when handling 32-bit data.
You can specify 32-bit counters directly, however, because they are 32-bit devices.
Use global labels when specifying labels.
48
FX
3U(C)
Expression in each language
Structured ladder
INT_TO_DINT
D0 _INT
X000 INT_TO_DINT_E
EN
D0 _INT
Execution condition
Conversion source word [signed] data
)
s
Execution status
Double word [signed] data after conversion
( )
d
1234
Double word [signed] data
FX FX FX
3G 2N(C) 1N(C)
INT_TO_DINT(_INT);
Example:
Label:=
*1 Label
INT_TO_DINT(D0);
INT_TO_DINT_E(EN,_INT,
Output label);
Example:
ENO
INT_TO_DINT_E(X000,D0,
*1 Label
Label);
Description
5 Applied Functions
5.1 Type Conversion Functions
FX FX /FX FX
1S U 2C 0N
ST
Data type
Bit
Word [signed]
Bit
Double Word [signed]
into double word [signed] data,
s
.
d
FX
0(S)