Subscribe to Our Youtube Channel
Related Manuals for Lectric XP 2.0
Summary of Contents for Lectric XP 2.0
- Page 1 OWNERS MANUAL Lectric XP 2.0 Lectric XP Step-Thru 2.0 V 1.1 | 2021 lectricebikes.com L E CT R I C E B I K E S.C O M | 602.715.0907...
-
Page 2: Table Of Contents
TABLE OF CONTENTS Table of Contents WARNING Maintaining Your Bike Unboxing Getting Started Folding and Unfolding the Bike Preparing to Ride Recommended Torque Values Battery Operating your battery Keeping Your Battery Healthy Charging Your Battery Battery Safety Operating your new eBike Cockpit Tour Your First Ride Front and Rear Lights... - Page 3 THANK YOU FOR YOUR PURCHASE OF A LECTRIC EBIKE. We appreciate your business and we hope you thoroughly enjoy riding your new eBike. If you need any assistance please do not hesitate to reach out to us. CONTACT INFORMATION Email: contact@lectricebikes.com Website: lectricebikes.com...
-
Page 4: Warning
It does not mean that the bike and its mechanical and electrical components are waterproof. We do not recommend storing or using the bike in excessively wet conditions. The warranty for the Lectric XP does not cover water damage. For technical assistance or warranty claims contact Lectric eBikes at (602) 715-0907 or email at contact@lectricebikes.com. -
Page 5: Maintaining Your Bike
Before each ride ensure all electrical wires are connected. • The Lectric XP is not waterproof. The bike has an IP rating of 65. It is likely that components will not sustain damage in most rain showers, however Lectric eBikes recommends storing and riding the bike in a dry environment. - Page 6 Shifting Shifting cables will stretch during the wear-in period. This may affect shifting performance and the derailleur may need to be adjusted. Hardware All hardware should be torqued to the torque specified in the Recommended Torque Values section of this manual. Refer to the table of contents at the beginning of this manual for the page number of this section.
- Page 7 Quarterly (or about every 750-1500 miles) • Check all items on the Monthly service list above. • Check tire tread for excessive wear. Replace if necessary. • Check that electrical connectors and cable housings are secured away from moving parts and are free from damage. Replace if necessary.
-
Page 8: Unboxing
UNBOXING GETTING STARTED Congratulations on your purchase of a new Lectric XP eBike! Your bike comes in the box fully assembled. The instructions that follow are intended to serve as a guide in unboxing and getting familiar with your new bike. The bike may require adjustments upon being received and unboxed, as shipping can sometimes be bumpy. -
Page 9: Folding And Unfolding The Bike
FOLDING AND UNFOLDING THE BIKE The Lectric XP folds in the center of the frame as well as at the handlebars. Instructions for folding and unfolding the bike can be found below: Handlebars 1. - Page 10 Frame 1. To unfold the bike frame, grab the handlebar stem and rear end of the bike while standing near where the battery is exposed. Lift the bike slightly off the ground and swing the bike to its closed position. 2.
-
Page 11: Preparing To Ride
PREPARING TO RIDE • Ensure all components are properly secured before riding otherwise serious harm or death could occur. All components should be torqued to the torque specified in the Recommended Torque Values section of this manual. Refer to the table of contents at the beginning of this manual for the page number of this section. - Page 12 • To adjust your seat up or down, unlatch the seatpost clamp. Move the seat to the desired height and close the seatpost clamp. The open and closed positions of the seatpost clamp are shown below (open position on left, closed position on right). •...
- Page 13 • Check your seatpost clamp and handlebar stem quick releases torque. They should be tight enough so that they do not twist or fall down when the bike is in use.Unlatch the quick releases and tighten by turning the bolt clockwise. Make sure both quick releases are tightened to the torque listed in the Recommended Torque Values section of this manual.
-
Page 14: Recommended Torque Values
RECOMMENDED TORQUE VALUES It is recommended that fasteners be tightened to the manufacturer’s specification found below: Part Required Torque (N*m) Front Wheel Axle Nuts Rear Wheel Axle Nuts Disc Rotor Mounting Bolts Brake Lever Clamp Bolts Brake Caliper Mounting Bolts Shifter Clamp Bolt Seatpost Clamp SaddleRail Binder... -
Page 15: Battery
BATTERY OPERATING YOUR BATTERY Your bike comes with a 48V lithium ion battery. The battery is located inside of the front half of the folding frame. The battery compartment can be accessed by folding the bike. The bike’s battery comes with a set of keys that are used to turn it on/off as well as keep it unlocked/ locked to the frame. - Page 16 To turn on and lock the battery 1. If it is not already, fully insert the battery into the bike frame with the keys removed. At this time, the locking pin will be retracted. When the battery is locked, the locking pin will protrude through the frame and be visible.
-
Page 17: Keeping Your Battery Healthy
If your battery impacts the ground and is damaged, discontinue use and contact Lectric eBikes immediately. KEEPING YOUR BATTERY HEALTHY • If you know you won’t be using the battery for more than a few days, keep it charged at about 75% capacity. -
Page 18: Charging Your Battery
Locate the charge port on the side of the battery. You can charge the battery from this port while the battery is on or off the bike. The battery on the Lectric XP comes with almost a full charge. should plug your battery in when you first receive it to ensure it is fully charged prior to your first ride. -
Page 19: Battery Safety
Lithium Ion batteries can be dangerous. Take care when using and charging your battery. Failure to follow the above guidelines could result in damage to property and/or serious injury. Contact Lectric eBikes immediately if you have any questions regarding battery safety. B AT T E RY... -
Page 20: Operating Your New Ebike
Now that your eBike is unfolded it is almost time to start riding. The Lectric XP eBike is equipped with pedal assist, a twist throttle, and can also be used as a regular bike. To use electric assist, the battery must be charged, inserted into the frame, and the key must be in the battery and turned to the ON position. - Page 21 Display Control Pad PLUS BUTTON POWER BUTTON MINUS BUTTON O P E R AT I N G YO U R N E W E B I K E...
-
Page 22: Your First Ride
YOUR FIRST RIDE To use your electric bike: Read the entirety of this manual before taking your first ride. Especially the Safety, Folding and Unfolding the Bike, Preparing to Ride, and Operating Safety sections. The page number of these sections can be found by referring to the table of contents at the beginning of this manual. - Page 23 Ensure your battery is fully charged before your first ride. 7. If the battery is not already inside the bike, slide it inside of the frame and lock it in position. Make sure the battery is all the way inside the bike. Once the battery is secured inside, insert the key into the battery via the port on the underbelly of the frame near the seatpost.
-
Page 24: Front And Rear Lights
In general, electric bikes are heavier than their non-electric counterparts. This makes walking the bike a more strenuous activity. To make walking the bike easier, the Lectric XP is equipped with walk mode. If you hold down the minus button on the display control pad, the motor will engage at a speed similar to a slow walk. -
Page 25: Operating Safety
OPERATING SAFETY Before riding the bike for the first time, ensure that you have read and understood this manual. Make sure you understand how to turn on and activate the pedal assist and throttle. When first riding the bike, take care to start slowly in a low level of pedal assist. Take your first ride in a safe area away from cars, other bikers, pedestrians, or other potentially dangerous obstacles. -
Page 26: Speed Gear System
7 SPEED GEAR SYSTEM The Lectric XP comes with a 7 speed Shimano freewheel (Note: the freewheel is the cluster of sprockets on the rear wheel of the bike). This allows the rider to maintain a comfortable level of effort and pedaling speed throughout different terrains. -
Page 27: Mechanical Disc Brakes
MECHANICAL DISC BRAKES The Lectric XP is equipped with mechanical disc brakes to ensure that you can stop quickly, even at high speeds. The brakes are engaged by squeezing the brake levers towards the handlebars. This pulls the brake cable, which closes the brake caliper. The brake caliper then makes contact with the brake rotor which is attached to the bike wheels. -
Page 28: Lcd Display Functions
LCD DISPLAY FUNCTIONS Walk Mode, Cruise Control, and Pedal assist (PAS) Level Indicator Odometer, Trip A, Voltage, Current, Trip Timer (TM) readouts Battery level indicator bar Maximum and Average Speed Speedometer in MPH or KM/H Light On/Off Indicator Mile and kilometer indicators YO U R F I R S T R I D E... - Page 29 Operating the LCD Display Turning the bike ON/OFF Hold the power button until the display turns on Increase Pedal Assist Level Press plus button Decrease Pedal Assist Level Press minus button Hold the plus button for 3 Turn ON/OFF front/rear lights seconds until lights turn on, repeat to turn off Toggle Odometer, Trip A, Voltage,...
- Page 30 Display Settings To change display settings, hold the plus and minus button simultaneously to enter into the advanced settings menu. In this menu, clicking the power button will toggle between each numbered setting. To adjust the value of each setting, click the plus and minus buttons accordingly.
-
Page 31: Cruise Control
Other Display Functions Cruise Control Cruise control on the Lectric XP works similarly to cruise control on a car. To activate: hold the minus button while twisting the throttle. The bike will try to maintain a speed based on the position of the throttle when cruise control was activated. -
Page 32: Changing The Top Speed
Changing the Top Speed The Lectric XP ships to all customers being capable of a maximum of 20 miles per hour (mph). This means it is a class 2 electric bike in states that recognize 3 classes of eBikes. In most states that only recognize eBikes generally, the 20 mph top speed is legal for use on public roads. -
Page 33: Tips When Riding To Increase Range
5. Power the bike off by holding the power button to save the settings you have just changed. CONGRATULATIONS! You can now cruise at speeds of up to 28 mph on your Lectric XP! Exercise increased caution as riding at higher speeds poses an increased safety risk and may result in serious injury or death. - Page 34 Rough Range Estimates The range the bike can go on a single battery charge can vary significantly between riders, terrain, wind conditions, user input, and additional payload weight. The following table shows rough estimations of ranges riders should expect in different conditions. All tests were performed with: •...
-
Page 35: Troubleshooting
Solutions to common problems, as well as error code meanings, can be found below. If you have any questions at all regarding the basic troubleshooting below, reach out to Lectric eBikes customer support. Most Common Solutions Issue Bike won’t turn on... -
Page 36: Error Codes
ERROR CODES Meaning Most Common Solution Error Code E003 PAS Sensor Fault Check PAS Quick Plug E006 Battery Undervoltage Fully Charge Battery E007 Motor Fault Check Motor Quick Plug E008 Throttle Fault Check Throttle Quick Plug Controller Fault Check Controller Connections E009 E010 Display... -
Page 37: Safety
SAFETY Helmets and Local Laws Always wear a helmet when riding your eBike. Ensure that the helmet fits your head and is securely tightened down. Before riding, read local laws and comply with all rules relating to cycling and eBiking in your area. - Page 38 Riding at Night Riding at night comes with more risks than riding during the day due to decreased visibility so riders are encouraged to exercise increased caution. Before riding at night, make sure that reflectors are installed on your eBike. For increased visibility, also ensure the front headlight and rear tail light are turned on and adjusted such that other people on the road can see them clearly.
-
Page 39: Warranty & Disclaimer
WARRANTY & DISCLAIMER Lectric eBikes should be operated in accordance with the Lectric eBikes owner’s manual provided with the bike. Lectric eBikes warrants to the original registered purchaser that Lectric eBikes shall be free from all defects in material and workmanship for a period of 12 months from the date of shipment, when used in accordance with the owner’s manual and for the purpose intended. - Page 40 Damage as a result of an accident is not covered under this warranty, and Lectric eBikes is not responsible for repair or replacement of damaged bikes or parts. Lectric eBikes reserves the right to change its warranty at any time and without notice. Bike Performance Disclaimer The bikes listed range and top speed are estimates (not guarantees) of expected performance.
- Page 41 It is the sole responsibility of the rider to become properly educated and prepared to ride safely. Once in possession of the bike, Lectric eBikes strongly encourages and recommends that all customers have a certified and reputable bicycle mechanic complete a full inspection of each component on the bicycle to ensure it is safe for operation.
Need help?
Do you have a question about the XP 2.0 and is the answer not in the manual?
Questions and answers
When I turn the key the bike does not turn on
The Lectric XP 2.0 bike may not turn on when the key is turned due to several possible issues:
1. Battery Charge: The battery may not be sufficiently charged. Ensure the battery is fully charged until the light on the charger turns green.
2. Key Position: The key might not be in the correct position. Insert the key into the battery and turn it counterclockwise to the "ON" position or until it is parallel with the frame.
3. Display Connection: There could be a connection issue with the display. Follow the cable from the display to the quick plug, unplug it with a quick pull (without twisting), inspect both sides of the plug, and reconnect it properly.
If these steps do not resolve the issue, contacting customer support is recommended.
This answer is automatically generated
I’m having a problem with unfolding the bike. I can only open the lever to a 45 degree angle. I’ve tried machine oil and WD40. It seems that the “open” button on top doesn’t work properly. **** I doing something wrong or is this a common problem?
The context does not explicitly mention a common issue where the Lectric XP 2.0 bike's lever only opens to a 45-degree angle. However, it does mention that the folding latch should be adjusted properly so that it is not too tight, allowing it to be opened when needed. If the lever does not fully open, it may be due to over-tightening or improper adjustment of the latch.
This answer is automatically generated
Is there a reset **** for the lcd
Yes, the odometer on the Lectric XP 2.0 can be reset by holding the plus button for 5 seconds. However, there is no mention of a full LCD reset option.
This answer is automatically generated