Table of Contents
Advertisement
Overview of Contents
This section contains a short description of the content of each chapter and
appendix in this manual.
Chapter 1, Hardware Preparation and
configuration, basic preparation and installation of the memory
mezzanine, PMCs, and the CPN5365.
Chapter 2, Installing the
installation of the rear transition module. Pin assignments for the RTM are
at the end of this chapter.
Chapter 3, Starting Up the
power-up procedure, switches, and indicators on the single board
computer.
Chapter 4, Functional
processor, PCI bus, host and nonhost slot mounting, WDT, resets, clock
functions and a general description of the CPN5365 on a block diagram
level. This chapter also includes information about the PhoenixBIOS.
Chapter 5, Connector Pin
the CPN5365 base board.
Appendix A,
specifications.
Appendix C, Thermal
significant components on the single board computer.
Appendix C, Related
Group documents, manufacturer's documents, and specifications and
provides the URLs for this information.
Who Should Use This Guide
The information in this guide is written for system installers, original
equipment manufacturers (OEM) and technicians. The procedures assume
familiarity with the safety practices and regulatory compliance required
xviii
CPTM-01, describes the features, functions, and
CPN5365, provides information about the
Description, provides brief descriptions about the
Assignments, contains the pin assignments for
Specifications, provides physical and mechanical board
Analysis, provides information about thermally
Documentation, lists related Motorola Computer
Installation, describes the features,
Advertisement
Table of Contents
