Siemens SIMATIC NET RUGGEDCOM MX5000 Installation Manual page 52

a
Siemens-specified severity levels
IEEE 1613 EMC Type Tests
Note
The RUGGEDCOM MX5000 meets Class 2 requirements for an all-fiber configuration
and Class 1 requirements for copper ports.
Environmental Type Tests
IEC 60068-2-1
IEC 60068-2-2
IEC 60068-2-30
IEC 60255-21-1
RUGGEDCOM MX5000
Installation Manual, 01/2021, C79000-G8976-1059-13
Test
HV Impulse
Description
ESD
Radiated RFI
Fast Transient
Oscillatory
HV Impulse
Dielectric Strength
Test
Cold Temperature
Dry Heat
Humidity (Damp
Heat, Cyclic)
6.3 EMC and Environmental Type Tests
Description
DC Power ports
AC Power ports
Signal ports
DC Power ports
AC Power ports
Enclosure Contact
Enclosure Air
Enclosure ports
Signal ports
DC Power ports
AC Power ports
Earth ground ports
Signal ports
DC Power ports
AC Power ports
Signal ports
DC Power ports
AC Power ports
Signal ports
DC Power ports
AC Power ports
Description
Test Ad
Test Bd
Test Db
Vibration
Certification
Test Levels
2 kV
2 kV
5 kV (Fail-Safe
Relay output)
5 kV
5 kV
Test Levels
+/-2 kV, +/-4 kV, +/- 8 kV
+/-4 kV, +/-8 kV, +/-15 kV
35 V/m
+/- 4 kV @ 2.5 kHz
+/- 4 kV
+/- 4 kV
+/- 4 kV
2.5 kV common mode @1 MHz
2.5 kV common, 1 kV
differential mode @ 1 MHz
2.5 kV common, 1 kV
differential mode @ 1 MHz
5 kV (Fail-Safe Relay output)
5 kV
5 kV
2 kV
2 kV
2 kV
Test Levels
-40 °C (-40 °F), 16 Hours
85 °C (185 °F), 16 Hours
95% (non-condensing),
55 °C (131 °F), 6 cycles
2 g @ 10 - 150 Hz
Severity
Levels
43