Table of Contents
Advertisement
REAR AXLE
NOTE:
In removing and installing the rear axle, the same procedure
is required on both the right and left sides. The procedure de-
scribed here is a representative one. If it is used on one side,
it must be used in symmetry on the other side.
REMOVAL
1) Hoist vehicle and remove rear wheel.
2) Pull brake drum. (Refer to steps 2) to 6 on WHEEL BEARING
AND WHEEL STUD in this section.)
3) From bracket on axle, remove E-ring (1).
4) Disconnect brake pipe flare nut (1) from wheel cylinder (2).
5) Put breeder plug cap (3) on to brake pipe (4) to prevent brake
fluid outflow.
6) Remove brake hose/pipe from bracket on axle.
7) Remove rear brake back plate bolts (1) and remove back plate
from axle (2).
8) Support center of rear axle (2) by using floor jack (1).
REAR SUSPENSION 3E1-13
- Quick Links:
- Engine
Hide quick links:
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the Maruti 800 and is the answer not in the manual?
Questions and answers
Quelle Bougie utiliser?!
The following spark plugs are compatible with the Maruti Suzuki Maruti 800:
1. NIKAVI SP07 Power Spark Plug
2. Bosch F 002 G40265-079 Spark Plug (Set of 3)
Both options are suitable for the vehicle.
This answer is automatically generated
Maruthi 800 petrol distributore timing digree?
The ignition timing for the Maruti 800 petrol engine is about 8° BTDC (Before Top Dead Center) at idle.
This answer is automatically generated