Power Management Setup - A Motherboard - Fujitsu TeamPoS 2000 Installation And Maintenance Manual

TeamPoS 2000

9.1.6 Power Management Setup - A Motherboard

Factory Default Settings
ACPI Function (see note)
Power Management
PM Control by APM
Video Off Method
Video Off After
MODEM Use IRQ
Doze Mode
Standby Mode
Suspend Mode
HDD Power Down
Throttle Duty Cycle
PCI/VGA Act-Monitor
Soft-Off by PWR-BTTN
CPUFAN Off In Suspend
PowerOn by Ring
Power On on PCI card
Resume by alarm
Wake Up On LAN
Note: When a 133PQ keyboard is used in a Windows 2000 or XP environment, ACPI
function must be set to "Enabled" or the MSR will not work. If the operating
system is configured with ACPI enabled and BIOS is set to ACPI disabled, the
system will not boot up.
90000291
ROM PCI /ISA BIOS (XXXXXXXX)
POWER MANAGEMENT SETUP
AWARD SOFTWARE, INC.
: Disabled IRQ 8 Break Suspend
: User Define ** Reload Global Timer Events**
: No IRQ [3-7, 9-15], NMI
: DPMS Primary IDE 0
: NA Primary IDE 1
: NA Secondary IDE 0
: Disabled Secondary IDE 1
: Disabled Floppy Disk
: Disabled Serial Port
: Disabled Parallel Port
: 50.0%
: Disabled
: Delay 4 sec.
: Disabled
: Disabled
: Disabled
: Disabled
: Enabled
Esc: Quit
F1 : Help
F5 : Old Valuess
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
Rev 3.0
MAINTENANCE MANUAL
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled
: Select
PU/PD/+/- : Modify
(Shift) F2 : Color
9-5