Philips DreamStation 2 User Manual page 63

Guidance and Manufacturer's Declaration - Electromagnetic Immunity – This device is
intended for use in the electromagnetic environment specified below. The user of this device
should make sure it is used in such an environment.
i T
mmuniTy EsT
Electrostatic Discharge
(ESD)
IEC 61000-4-2
Electrical fast Transient/
burst
IEC 61000-4-4
Surge
IEC 61000-4-5
iEC 60601 T l
EsT EvEl
±8 kV contact
±2 kV, ±4 kV, ±8 kV, &
±15 kV air discharges
±2 kV for power supply
lines, 100 kHz repetition
rate
±1 kV for input-output
lines; 100 kHz repetition
rate
±1 kV differential mode
±2 kV common mode
C l
omplianCE EvEl
±8 kV contact
±2 kV, ±4 kV, ±8 kV, &
±15 kV air discharges
±2 kV for power supply
lines, 100 kHz repetition
rate
N/A- Device does not
have user I/O lines that
are longer than 3m in
length.
±1 kV differential mode
N/A: Device is Class 2
and does not have earth
connection.
E
lECTromagnETiC
E -
nvironmEnT
g
uidanCE
Floors should be wood,
concrete or ceramic
tile. If floors are
covered with synthetic
material, the relative
humidity should be at
least 35%.
Mains power quality
should be that of
a typical home or
hospital environment.
Mains power quality
should be that of
a typical home or
hospital environment.
- 59 -