Huawei SUN2000-2KTL-L1 User Manual page 61

SUN2000-(2KTL-6KTL)-L1
User Manual
Procedure
Step 1 Connect signal cables to corresponding signal connectors.
● Ensure that the protection layer of the cable is in the connector. The surplus
● Ensure that the exposed core is totally inserted into the cable hole.
● Ensure that the signal cables are connected securely.
● Ensure that the cables are not twisted.
● If multiple signal cables need to be connected to a single connector, ensure
Figure 5-25 Crimping two signal cables
Figure 5-26 Crimping three signal cables
Issue 04 (2021-04-01)
NO TICE
core should be cut off from the protection layer.
that the outer diameters of the signal cables are the same.
Copyright © Huawei Technologies Co., Ltd.
5 Electrical Connection
55