Connections; Usb Connection; Usb Direct Connection - Datalogic Skorpio X5 User Manual
Rugged mobile computer with 1d/2d imager
Hide thumbs
Also See for Skorpio X5:
- Quick start manual (8 pages) ,
- Quick start manual (2 pages) ,
- Quick start manual (2 pages)
Table of Contents
Advertisement
CONNECTIONS
USB CONNECTION
USB Direct Connection
You can use the provided USB Type A to Type-C cable to directly connect the Skorpio X5
to a host computer and transfer data through the USB interface.
Skorpio X5
1. Turn on the Skorpio X5.
2. Turn on the host computer.
3. Connect the device to the host PC via USB cable.
4. Scroll down the notification bar, tap the charging notification and change to
5. The device is now visible in your PC as a USB disk. You can start the data transfer.
94
SKORPIO™ X5
USB Type A to Type-C Cable
fer
files.
NOTE: Connection through the cable complies to USB 3.1 standard.
Host Computer
Trans-
- Quick Links:
- Scanner Settings
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Skorpio X5 and is the answer not in the manual?
Questions and answers
We have an issue where multiple of our X5 Scanners are black screening, the lights are still coming on when buttons are pressed but the screen is completely black. Our Current fix is by taking the battery out and waiting for the device to shutoff. Then we boot it back up as usual. Any idea on what is causing this issue? Not sure if its a user error, only one person has been reporting the issue.
The black screen issue on multiple Datalogic Skorpio X5 scanners, despite the lights turning on when buttons are pressed, could be caused by a disconnected or drained main battery pack. The manual states that the main battery pack is disconnected at the factory to prevent excessive draining. If the battery is not properly connected or fully charged, the device may power on partially but fail to display anything on the screen. Charging the battery as indicated in the Quick Start Guide or ensuring proper battery connection may resolve the issue.
This answer is automatically generated