Easee Home User's Installation Manual page 16

7
Chargeberry
Installation details
Enter the installation details and follow the on-screen
instructions. Press
WARNING! Maximum charging current and fuse values
must always be specified by an authorised electrician.
NOTICE! After 15 minutes of commissioning, the values
cannot be changed anymore via WiFi interface. In order
to repeat this operation, turn off and on the supplying
power to the charger.
16
on the screen for more information.
NOTICE! If the backplate has been used before or you
are unsure whether it has, please remove all data stored
in the RFID chip on the backplate(s) before installation.
This can be done via the Easee Installer app (available
soon).
NOTICE!
For several Charging Robots connected to the
same fuse, all backplates must be programmed with
the same Chargeberry in order for the load balancing
to work.
"CLICK!"