4
PROCEDURES BEFORE OPERATION
This chapter describes the procedures before operation.
1.
Mounting a module
Mount the GP-IB interface module in any desired configuration.
Page 24 SYSTEM CONFIGURATION
2.
Wiring
Wire the GP-IB interface module to external devices.
Page 27 External Wiring
3.
Adding a module
Add the GP-IB interface module to a module configuration by using the engineering tool. For details, refer to the following.
GX Works3 Operating Manual
4.
Parameter settings
Set up the parameters of the GP-IB interface module by using the engineering tool. For details, refer to the following.
MELSEC iQ-R GP-IB Interface Module User's Manual (Application)
5.
Programming
Create programs. For details, refer to the following.
Page 28 COMMUNICATION EXAMPLES
4 PROCEDURES BEFORE OPERATION
22