Scanning From Application; How To Scan - Toshiba e-studio 2822AM User Manual

Scanning From Application

0.
This equipment supports scanning from TWAIN-compatible applications. TWAIN is the standard that links
applications and scanners that acquire images. For TWAIN support, see your application's manual.
You can make use of e-STUDIO Scan Editor bundled with the equipment. It helps you scan and edit images. For the
details, refer to the following page:
 P.125 "Scanning from e-STUDIO Scan Editor"
Before you start scanning with this equipment, make sure that you have installed the scanner driver. For details, refer
to the Software Installation Guide.
The default original size depends on the measurement system on Windows: A4 for Metric or LT for the North America.
You can change the default only before the first execution after installation. For the measurement system, see the
Windows Help.
 P.118 "How to scan"
 How to scan
Follow the steps below to scan the original. The following describes a general scanning operation that is common to
TWAIN-compatible applications.
Place the original(s).
1
 P.33 "Placing originals on the original glass"
 P.34 "Placing originals on the Reversing Automatic Document Feeder"
Run your TWAIN-compatible application and execute the image acquisition command.
2
You can usually execute the scan or image acquisition command on the [File] menu to select this equipment. The
location of the command and the method to select the scanner vary depending on the application. See your
application's manual.
3 Set the scan settings.
 You can make various options to scan the original image.
 P.120 "Scan options"
 You can also make the scan settings using the Easy Set feature.
 P.123 "Using the Easy Set feature"
Click [Pre-Scan] to preview the original.
4
If you are not satisfied with the preview image, change the scan settings and preview the image again.

118 Scanning From Application