Sony FMP-X10 Repair Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. Media Player
  5. FMP-X10
  6. Repair manual

Sony FMP-X10 Repair Manual

4k ultra hd media player
Hide thumbs Also See for FMP-X10:
Table of Contents

Advertisement

Quick Links

HISTORY INFORMATION FOR THE FOLLOWING MANUAL:
REPAIR MANUAL
ORIGINAL MANUAL ISSUE DATE: 6/2014
Version Date
1.0
06/24/2014
2.0
07/14/2014
Subject
Original Manual Release Date.
Reissue entire Manual.
MODEL
DESTINATION
FMP-X10
4K Ultra HD Media Player
Self Diagnosis
Supported model
FMP-X10
4K-MP
US
9-888-645-02

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FMP-X10 and is the answer not in the manual?

Questions and answers

Related Manuals for Sony FMP-X10

Summary of Contents for Sony FMP-X10

  • Page 1 Self Diagnosis Supported model HISTORY INFORMATION FOR THE FOLLOWING MANUAL: REPAIR MANUAL FMP-X10 ORIGINAL MANUAL ISSUE DATE: 6/2014 4K-MP MODEL DESTINATION FMP-X10 Version Date Subject 06/24/2014 Original Manual Release Date. 07/14/2014 Reissue entire Manual. 4K Ultra HD Media Player 9-888-645-02...

  • Page 2: Table Of Contents

    Schematics and Supporting Information .............33 Accessories and Packaging ................16 PF-1001 A Side ..................33 Miscellaneous ....................16 PF-1001 B Side ..................33 Remote Commander ...................16 PF-1001 Board Schematic (1 of 1) ............34 Screw Chart ....................17 SAL-1001 A Side ..................35 SAL-1001 B Side ..................36 FMP-X10...
  • Page 3 SAL-1001 Board Schematic (24 of 28) ...........60 SAL-1001 Board Schematic (25 of 28) ...........61 SAL-1001 Board Schematic (26 of 28) ...........62 SAL-1001 Board Schematic (27 of 28) ...........63 SAL-1001 Board Schematic (28 of 28) ...........64 Appendix A: Encryption Key Components ..........A-1 FMP-X10...

  • Page 4: Cautions And Warnings

    It is essential that that were installed during a previous repair. Point them out to the these critical parts be replaced only with the Sony part number specified in customer and recommend their replacement.
  • Page 5 2 VAC range are Figure B. Checking for earth ground. suitable. (see Figure A) To Exposed Metal Parts on Set Voltmeter 0.15 µF (0.75V) Earth Ground Figure A. Use an AC voltmeter to check AC leakage. FMP-X10...

  • Page 6: Specifications

    AC power cord (1)/ AC Adapter (1)/ High Speed HDMI cable (1) / Remote Control RMT-D304 with CR2032 battery (1) / Startup Guide, Reference Guide, End User License Agreement and Warranty card (http://rd1.sony.net/help/hv/fmpx10/en/). Speci cations and design are subject to change without notice. FMP-X10...

  • Page 7: Section 1 - Troubleshooting

    This differs from accessing Service Adjustments Mode (Arrow Write count of NAND device. See next page for detail. Operation Time and Power on Count 12345: total operation time(ETI1) by hour (max 65535) 00333: power on count (max 65535) SAMPLE SELF CHECK DIAGNOSIS PAGE FMP-X10...

  • Page 8: Resetting The Self-Diagnosis History

    000000000000 000000000000 000000000000 00 005 MEPS_WDT 000000000000 000000000000 000000000000 00 006 VPC_WDT 000000000000 000000000000 000000000000 00 007 TEMP_ERR 000000000000 000000000000 000000000000 00 008 HOST_WDT 000000000000 000000000000 000000000000 00 009 STBY_WDT 000000000000 000000000000 000000000000 00 010 LYON_ERR 12345-00333 00000000001234567890-00000000000000000000 SAMPLE SELF CHECK PAGE FMP-X10...

  • Page 9: Power And Control Block Diagram

    29 GND_D GND_D 30 GND_D FAN1 USB_DP 31 USB_DP USB_DM 32 USB_DM CN304 GND_D 33 GND_D VCC5V 34 VCC5V VCC5V 35 VCC5V VCC5V 36 VCC5V FAN2 GND_D 37 GND_D CN302 STB3.3V 38 STB3.3V STB3.3V 39 STB3.3V GND_D 40 GND_D FMP-X10...

  • Page 10: Error Chart

    Refer to the [Reboot] spec. Software Operation (WDT) [Reboot] VPC_WDT TEMP_ERR Temperature in the Chassis Detecting/Observing chassis thermal error (Thermal Error) HOST_WDT Refer to the [Reboot] spec. Software Operation (WDT) [Reboot] STBY_WDT IC4000(HEVC Decoder/CPU) Device error and Lyon WDT LYON_ERR IC4000(HEVC Decoder/CPU) detection FMP-X10...

  • Page 11: No Power Flowchart

    PS4903 of PS9701 on Power Supply. Is it approximately on Power Supply. 3.3V? Is it approximately 19.5V? Check around Check around AC Adapter IC9704 IC9709 *For Device Allocation information, refer to “Section 4 - Diagrams” on page FMP-X10...

  • Page 12: Standby Led Blinking Flowchart

    Check Power Supply for Digital circuit (12V: Ref IC9706 ) Check Power Supply for IC9000 (3.3V, 1.8V,1.5V,1.0V) Check IC9000 5x,6x,8x,9x Check FAN, Temp sensor (IC306) Check IC4000 *For Device Allocation information, refer to “Section 4 - Diagrams” on page FMP-X10...

  • Page 13: Section 2 - Disassembly/Part Number Information

    2. Remove the 2 top screws shown in the illustrarion and lift the Top Shield to detach. 2. Place the unit face up to locate and remove the 2 screws. Top, Shield Top, Shield 3. Turn the unit upside-down, then slide the Bottom Cover as shown to lift and detach. FMP-X10...

  • Page 14: Removing The Hard Disk Drive/Hdd, X10

    4. Locate and remove 3 screws to lift and detach. SAL-1001, Board SAL-1001, Board HDD, X10 HDD, X10 5. Place HDD, X10 facing down, remove 4 screws to detach from HDD 5. Install the new SAL-1001 Board, screws and connectors. Bracket as shown. HDD, Bracket HDD, Bracket FMP-X10...

  • Page 15: Removing The Fans

    2. Remove 1 screw and lift the Wireless LAN Card as shown to detach. WLAN, Card WLAN, Card 2. Unclamp all the clips shown above and lift the Inner Panel Assembly to detach. Inner, Panel Assy Inner, Panel Assy FMP-X10...

  • Page 16: Exploded View

    Replace these components with SONY parts whose part numbers appear as shown in NOTE: The components identified by a red outline and a...

  • Page 17: Connectors

    Replace these components with SONY parts whose part numbers appear as shown in this manual or in supplements published by SONY. ACCESSORIES AND PACKAGING PART NO. DESCRIPTION...

  • Page 18: Screw Chart

    SECTION 2 - DISASSEMBLY/PART NUMBER INFORMATION SCREW CHART PART NUMBER DESCRIPTION FMP-X10 Cover Assembly Bottom (4), 7-685-546-19 SCREW +BTP 3X8 TYPE2 N-S Back Chassis Main (5), Top Shield (2) SCREW +P 3X3 7-682-144-09 Back Chassis Main (3) Main Board (7), Wireless Lan Card (1),...

  • Page 19: Section 3 - Updates And Adjustments

    Copying USB update file. Please wait… CR2032 battery manufactured by Sony. 5: finished The Software Update is complete. Some user settings may have changed during the update. Do you want to enable Automatic Software Download? 5: finished...

  • Page 20: Performing Basic Checks

    Check Network Condition after setting the 004 NETWORK Check and indicate Network Condition. Network Setup. (MAC Adress and other status). 009 HDD 001 SMART Diagnosis tool for HDD Condition. Check HDD condition before PC tool. BASIC CHECKS CHART FMP-X10...

  • Page 21: Accesing Service Mode

    FACTORY SETTING -->1 Video *1 Shipment Setting *1 Color Bar 2 Boot Counter 3 Boot Counter Reset Press (Enter button) to display the Color Bar screen. Press enter Color Bar Press to access the Service Mode initial screen. RETURN FMP-X10...
  • Page 22 RETURN Press (Return button) until the initial the *2 Boot Counter option. 002 FACT_SETTING screen appears on screen. DIGITAL (DIG_SRV_MODE) SERVICE DIGITAL SERVICE FACTORY SETTING 003 DIG_SRV_MODE 1 Shipment Setting 002 FACT_SETTING *2 Boot Counter 3 Boot Counter Reset FMP-X10...

  • Page 23: Network Test

    * 3 Boot Counter Reset Boot Count Reset is done Network information screen will appear as shown: DHCP : OFF IP Address : 192.168.0.11 Subnet Mask Default Gateway Primary DNS Secondary DNS MAC Adress : D8:12:56:98:CF:22 LINK : OFF FMP-X10...

  • Page 24: Hdd Test

    HDD unit may be broken and next steps could not be performed. Press (Enter button) as required on screen. DIGITAL (HDD) SERVICE SMART *1 READ SMART DATA HDD Model = XXXXXXX Serial = XXXXXX Firm = XXXX Press enter Confirm the HDD Smart data that will appear on screen. FMP-X10...

  • Page 25: Section 4 - Diagrams

    Line with mark on the schematic diagrams and in the part list are critical to safe operation. RESISTOR COIL Replace these components with SONY parts whose part numbers appear as shown : RN METAL FILM : LF-8L MICRO INDUCTOR in this manual or in supplements published by SONY.

  • Page 26: Block Diagram

    SECTION 4 - DIAGRAMS BLOCK DIAGRAM Front USB2.0 HDMI2.0 HDMI HDMI Main WiFi USB2.0 USB2.0 WiFi (QCA) USB2.0 HDMI1.4 (Host) Key/FAN/LED Audio CEC(Main) Ether RMII Lyon Ether CEC(Audio) GPIO GPIO Ayu2 I2Sx3 I2Sx3 EXTERNAL HDD USB2.0 Rear USB- VBO (G&V) SATA 1TB/3.5I FMP-X10...

  • Page 27: Device Allocation

    SECTION 4 - DIAGRAMS DEVICE ALLOCATION HDMI Tx (IC3150) SAL-1001 (A SIDE VIEW) FMP-X10...

  • Page 28: Sal-1001 (B Side View)

    SECTION 4 - DIAGRAMS DEVICE ALLOCATION IC9000 IC4000 FAN, Temp Sensor (IC306) SAL-1001 (B SIDE VIEW) FMP-X10...

  • Page 29: Voltage Check Points

    [1] Check voltage from AC Adapter Normal voltage : 19.5V [2] Check voltage for standby power Normal voltage :5.8V [4] Check voltage for Digital circuit Normal voltage :12V [3] Check voltage for IC9000 standby power Normal voltage :3.3V SAL-1001 (A SIDE VIEW) FMP-X10...

  • Page 30: Checking The Ac Adapter (19.5V) Voltage

    SECTION 4 - DIAGRAMS CHECKING THE AC ADAPTER (19.5V) VOLTAGE Check point (Around PS9701) 19.5V (From AC Adapter) Check Voltage (19.5V) PS9701 19.5V FMP-X10...

  • Page 31: Checking The Standby Power (5.8V) Voltage

    SECTION 4 - DIAGRAMS CHECKING THE STANDBY POWER (5.8V) VOLTAGE 19.5V (From AC Adapter) Check Voltage (5.8V) Check point (Around IC9704) IC9704 & L9702 5.8V (for Standby circuit) FMP-X10...

  • Page 32: Checking The Ic9000 Standby Power (3.3V) Voltage

    SECTION 4 - DIAGRAMS CHECKING THE IC9000 STANDBY POWER (3.3V) VOLTAGE 5.8V Check point (Around IC9709) (for Standby Check Voltage (3.3V) circuit) IC9709 & PS4903 3.3V (for IC9000 Standby Power) FMP-X10...

  • Page 33: Checking The Digital Circuit (12V) Voltage

    SECTION 4 - DIAGRAMS CHECKING THE DIGITAL CIRCUIT (12V) VOLTAGE 19.5V (From AC Adapter) Check point (Around IC9706) IC9706 & L9704 (From AC Adapter) Check Voltage (12V) FMP-X10...

  • Page 34: Schematics And Supporting Information

    SECTION 4 - DIAGRAMS SCHEMATICS AND SUPPORTING INFORMATION PF-1001 PF-1001 A SIDE PF-1001 B SIDE FMP-X10...

  • Page 35: Pf-1001 Board Schematic (1 Of 1)

    655294101 655294101 655294101 655294101 STB3.3V LED_DIM R1009 GND_D ’14,04,24 Type-B_US/CHINA ’14,04,01 Type-B_US/CHINA ’14,03,19 S1004 ’14,03,14 ORIGINAL MODEL PF-1001 DESCRIPTION FRONT PWB PART NO. SHEET ALL resistors are in ohms,W unless otherwise noted. ALL capacitors are in uF(p:pF)unless otherwise noted. FMP-X10...

  • Page 36: Sal-1001 A Side

    C4166 C4165 TP9814 HA001 cam011 JL4032 CL4003 CL4002 C4013 CL4004 C4117 R4174 R4175 R4176 R4826 R4803 cam009 CN4101 C4104 KJ001 cam013 CN4000 CN4002 IC4105 cam016 KJ002 KA001 cam007 C4102 C4105 TP9810 cam029 cam006 cam005 cam001 cam024 SAL-1001 A SIDE FMP-X10...

  • Page 37: Sal-1001 B Side

    SECTION 4 - DIAGRAMS SAL-1001 3 R 6 5 C 3 SAL-1001 B SIDE FMP-X10...

  • Page 38: Sal-1001 Board Schematic (1 Of 28)

    1.07V (240AVS R9129 14. 1. 7 13.12.19 13.12.19 DDR3_+1.5V 1.505Vtyp R9105,R9106 ORIGINAL SAL BOARD MODEL DESCRIPTION DCDC Convertor AY PART NO. SHEET Proto ALL resistors are in ohms,W unless otherwise noted. 2/29 ALL capacitors are in uF(p:pF)unless otherwise noted. FMP-X10...

  • Page 39: Sal-1001 Board Schematic (2 Of 28)

    No.164 L9601,L9602 1-460-608-11 1-460-485-11 IC-CurrentLimit : 4.5A(min) 7.9A 6.7A 6.2A ORIGINAL SAL BOARD MODEL DESCRIPTION DCDC CONV FOR LY PART NO. SHEET Proto ALL resistors are in ohms,W unless otherwise noted. 3/29 ALL capacitors are in uF(p:pF)unless otherwise noted. FMP-X10...

  • Page 40: Sal-1001 Board Schematic (3 Of 28)

    DG6045C(New2.2uH) D9716 KDZTR6.8B REF L9708 PART NO. SHEET R9799 ->TDK_VLP8040(146060911) +5.0V_USB_2,+5.0V_USB_3,+5.0V_HDD MAIN_PWR Proto D9717 SS3P3-M3/84A D9701,D9704,D9715,R9702,R9729,R9753 NoM’t R9701,R9728,R9752 M’t Pattern Short ALL resistors are in ohms,W unless otherwise noted. 4/29 R9750,R9751,R9759,R9760,R9788,R9789, R9790,R9791,R9792,R9793,R9794,R9795 ALL capacitors are in uF(p;pF)unless otherwise noted. FMP-X10...

  • Page 41: Sal-1001 Board Schematic (4 Of 28)

    ET9832 1-854-047-11 No Mount H=6.5mm) ET9812 1-780-729-12 No Mount H=6.5mm ORIGINAL SAL BOARD MODEL DESCRIPTION DCDC CONV FOR RG PART NO. SHEET Proto ALL resistors are in ohms,W unless otherwise noted. 5/29 ALL capacitors are in uF(p;pF)unless otherwise noted. FMP-X10...

  • Page 42: Sal-1001 Board Schematic (5 Of 28)

    P-074 NoMT(Pin37 DESCRIPTION ’13.11.07 P-042 ’13.11.05 P-034 HDMI 21 -> 41) HDMI RG Tx ’13.11.05 P-032 Rx HPD Pull Up PART NO. SHEET ALL resistors are in ohms,W unless otherwise noted. 6/29 ALL capacitors are in uF(p;pF)unless otherwise noted. FMP-X10...

  • Page 43: Sal-1001 Board Schematic (6 Of 28)

    Pattarn Short R9204 0.1uF x16 pcs C9207,C9211,C9216 C9208,C9212,C9217 C9204,C9205,C9209,C9213,C9218 C9210,C9214,C9219 C9215,C9220 C9222,C9223,C9224 ORIGINAL SAL BOARD MODEL DESCRIPTION AY VCC/GND PART NO. SHEET Proto ALL resistors are in ohms,W unless otherwise noted. 7/29 ALL capacitors are in uF(p:pF)unless otherwise noted. FMP-X10...

  • Page 44: Sal-1001 Board Schematic (7 Of 28)

    C327 CN302 179450921 M_MS_PON MS_PON 3216 1608 DESCRIPTION AY MAIN C328 GND_D CN7001 GND_D *IC9000 CXD4741GB PART NO. SHEET CN304 Proto ALL resistors are in ohms,W unless otherwise noted. R7227 8/29 CHIP ALL capacitors are in uF(p;pF)unless otherwise noted. FMP-X10...

  • Page 45: Sal-1001 Board Schematic (8 Of 28)

    Pattern Short R7505,R7506,R7510,R7512,R7513,R7520, R7522,R7523,R7525,R7526,R7527,R7528, DESCRIPTION AY STANDBY R7529,R7530,R7532,R7533,R7534,R7535 R7570,R7571 R321 R7406 ECN:1 R7335 XX-> Mount PART NO. SHEET ECN1 R7336 Mount -> XX Proto ALL resistors are in ohms,W unless otherwise noted. 9/29 ALL capacitors are in uF(p:pF)unless otherwise noted. FMP-X10...

  • Page 46: Sal-1001 Board Schematic (9 Of 28)

    SECTION 4 - DIAGRAMS SAL-1001 BOARD SCHEMATIC (9 OF 28) FMP-X10...

  • Page 47: Sal-1001 Board Schematic (10 Of 28)

    SECTION 4 - DIAGRAMS SAL-1001 BOARD SCHEMATIC (10 OF 28) FMP-X10...

  • Page 48: Sal-1001 Board Schematic (11 Of 28)

    SAL BOARD VSSQ ORIGINAL MODEL 2nd Hynix H5TQ4G63AFR-PBCR 6-720-723-01 29nm Adie VSSQ DESCRIPTION AY DDR3 B PART NO. SHEET IC1602 Proto GND_D H5TQ4G63AFR-PBCR ALL resistors are in ohms,W unless otherwise noted. 12/29 ALL capacitors are in uF(p:pF)unless otherwise noted. FMP-X10...

  • Page 49: Sal-1001 Board Schematic (12 Of 28)

    DESCRIPTION HUB3_USB1_CN1_M AY USB Impedance 90 ohm 2013/11/13 10:08 [ SOC ] HUB3_USB2_SATA_P USB-HDD 240AVS HUB3_USB2_SATA_M PART NO. SHEET Proto IC9000 CXD4741GB CXD4741GB-1 ALL resistors are in ohms,W unless otherwise noted. 13/29 ALL capacitors are in uF(p:pF)unless otherwise noted. FMP-X10...

  • Page 50: Sal-1001 Board Schematic (13 Of 28)

    CHIP CHIP CHIP R5180 1/16W CHIP ORIGINAL SAL BOARD MODEL ’14.03.18 P-GE-185 DESCRIPTION AY HDMI Rx ’13.10.29 P-GE-011 PART NO. SHEET ’13.10.29 P-GE-011 ALL resistors are in ohms,W unless otherwise noted. 14/29 ALL capacitors are in uF(p:pF)unless otherwise noted. FMP-X10...

  • Page 51: Sal-1001 Board Schematic (14 Of 28)

    R6323 DESCRIPTION AY ETHER CHIP CHIP CHIP R6324 CHIP CHIP CHIP PART NO. SHEET R6325 Proto CHIP CHIP CHIP ALL resistors are in ohms,W unless otherwise noted. 15/29 R6347 ALL capacitors are in uF(p:pF)unless otherwise noted. CHIP CHIP CHIP FMP-X10...

  • Page 52: Sal-1001 Board Schematic (15 Of 28)

    C6810 X6801 25MHz C6821 0.01 Pattern Short R6812 L6803 L6803 P/N:1-456-583-21 =>1-457-223-11 ORIGINAL SAL BOARD MODEL DESCRIPTION AY SATA/WI-FI PART NO. SHEET Proto ALL resistors are in ohms,W unless otherwise noted. 16/29 ALL capacitors are in uF(p:pF)unless otherwise noted. FMP-X10...

  • Page 53: Sal-1001 Board Schematic (16 Of 28)

    ALL capacitors are in uF(p:pF)unless otherwise noted. THIS DOCUMENT IS THE PROPRIETARY PROPERTY OF SONY. ITS USE IS AUTHORIZED ONLY FOR RESPONDING TO A REQUEST FOR QUOTATION, OR FOR THE PERFORMANCE OF WORK FOR SONY. ALL QUESTIONS MUST BE REFERRED TO THE LOCAL PURCHASING DEPARTMENT OF SONY.

  • Page 54: Sal-1001 Board Schematic (17 Of 28)

    C8093 AY VBO Tx/LD ’14.05.02 P-XXX 2013/11/22 12:57 [ SOC ] 240AVS ’13.11.22 P-082 NoMT CN8001 PART NO. SHEET IC9000 CXD4741GB CXD4741GB-1 Proto ALL resistors are in ohms,W unless otherwise noted. 18/29 ALL capacitors are in uF(p:pF)unless otherwise noted. FMP-X10...

  • Page 55: Sal-1001 Board Schematic (18 Of 28)

    CHIP CHIP ALL resistors are in ohms,W unless otherwise noted. 1 : Emphasis Audio Match On 19/29 AUDIO 0 : Serial Format Select 1 (SFSEL1)=0 ALL capacitors are in uF(p:pF)unless otherwise noted. 1 : Serial Format Select 1 (SFSEL1)=1 FMP-X10...

  • Page 56: Sal-1001 Board Schematic (19 Of 28)

    CHIP ROGEU MOUNT : XX CHIP ROGUE No M : M’t PART NO. SHEET R4085 R4014 Proto 1/16W CHIP ALL resistors are in ohms,W unless otherwise noted. 20/29 S4000 169227021 ALL capacitors are in uF(p;pF)unless otherwise noted. PROTO LYON FMP-X10...

  • Page 57: Sal-1001 Board Schematic (20 Of 28)

    R4134 DESCRIPTION 1/16W CL4117 LY VBO/AUDIO/PCIE CHIP R4103 VR_VBRXBETERR VR_VSSRA GND_D R4135 1/16W GND_D CHIP GND_D PART NO. SHEET GND_D PROTO LYON Proto ALL resistors are in ohms,W unless otherwise noted. 21/29 ALL capacitors are in uF(p;pF)unless otherwise noted. FMP-X10...

  • Page 58: Sal-1001 Board Schematic (21 Of 28)

    Please make eMMC corner marking 11.5x13 and 10x11. ORIGINAL SAL BOARD MODEL DESCRIPTION LY FLASH Parttern short R4315,R4330 eMMC FLASH PART NO. SHEET Proto ALL resistors are in ohms,W unless otherwise noted. 22/29 ALL capacitors are in uF(p;pF)unless otherwise noted. FMP-X10...

  • Page 59: Sal-1001 Board Schematic (22 Of 28)

    A13 / A_DQ5 / A_DQ12 MODEL IC4000 DESCRIPTION LY DDR3_A DDR3(IC4402)Write CLK(+-) / DQSU_AB(+-) / DQSL_AB(+-) PART NO. SHEET Proto A13 / B_DQ5 / B_DQ12 ALL resistors are in ohms,W unless otherwise noted. 23/29 ALL capacitors are in uF(p;pF)unless otherwise noted. FMP-X10...

  • Page 60: Sal-1001 Board Schematic (23 Of 28)

    SAL BOARD MODEL IC4000 DDR3(IC4502)Write DESCRIPTION LY DDR3 B CLK(+-) / DQSU_AB(+-) / DQSL_AB(+-) A13 / B_DQ5 / B_DQ12 PART NO. SHEET Proto ALL resistors are in ohms,W unless otherwise noted. 24/29 ALL capacitors are in uF(p;pF)unless otherwise noted. FMP-X10...

  • Page 61: Sal-1001 Board Schematic (24 Of 28)

    SAL BOARD ORIGINAL DDR3(IC4602)Write MODEL IC4000 CLK(+-) / DQSU_AB(+-) / DQSL_AB(+-) DESCRIPTION LY DDR3 C A13 / B_DQ5 / B_DQ12 PART NO. SHEET Proto ALL resistors are in ohms,W unless otherwise noted. 25/29 ALL capacitors are in uF(p;pF)unless otherwise noted. FMP-X10...

  • Page 62: Sal-1001 Board Schematic (25 Of 28)

    AJ29 GND_D *IC4000 GND_D PORTION_1 (POWER) PORTION_2 (GND_1) PORTION_3 (GND_2) IC4000 CXD4754GB ORIGINAL SAL BOARD MODEL DESCRIPTION LY POWER PART NO. SHEET Proto ALL resistors are in ohms,W unless otherwise noted. 26/29 ALL capacitors are in uF(p;pF)unless otherwise noted. FMP-X10...

  • Page 63: Sal-1001 Board Schematic (26 Of 28)

    ’13.11.07 P-049 ORIGINAL MODEL ’13.11.07 P-048 Reserved -> +3.3V_MAIN DESCRIPTION LY HDMI OUT ’13.11.06 P-035 PART NO. SHEET ’13.11.05 P-033 ALL resistors are in ohms,W unless otherwise noted. 27/29 Close to CN1801 ALL capacitors are in uF(p;pF)unless otherwise noted. FMP-X10...

  • Page 64: Sal-1001 Board Schematic (27 Of 28)

    SAL BOARD ’13.11.05 P-032 Rx HPD Pull Up DESCRIPTION ’13.10.29 P-015 CEC IN/OUT HDMI RG Tx for Sub ’13.10.24 P-003 PART NO. SHEET ALL resistors are in ohms,W unless otherwise noted. 28/29 ALL capacitors are in uF(p;pF)unless otherwise noted. FMP-X10...

  • Page 65: Sal-1001 Board Schematic (28 Of 28)

    IC4904 TC7WZ32FK(TE85R) R4914 1/16W DESCRIPTION CHIP Pattern Short Q4901 R4905 FullColor LED R4923 AY FRONT I/F CHIP PART NO. SHEET R4931 1/16W CHIP ALL resistors are in ohms,W unless otherwise noted. 29/29 ALL capacitors are in uF(p:pF)unless otherwise noted. FMP-X10...

  • Page 66: Appendix A: Encryption Key Components

    APPENDIX A: ENCRYPTION KEY COMPONENTS Encryption key components developed by Sony Corporation contain confidential information, and shall be handled under the non-disclosure obligations provided in the applicable agreement with Sony Corporation (and/or its subsidiary). As part of this agreement specific instructions must be adhered to whenever a Circuit Board containing encryption key components is repaired and/or replaced pursuant to the following: In the service manual the Circuit Board(s) containing encryption key components shall be identified with a red outline and a .

Table of Contents