Electrical connection
Additonal light switch
(connection must be made a suitably
qualified electrician only)
^ Before connecting to an additional
light switch the lid of the control
module has to be taken off. It is
refitted later.
Connection can be made to a light
switch in the home via the middle
terminal b in the control module.
24
This will then enable the cooker hood
lighting to be switched on and off, or
dimmed (depending on model).
If a window contact switch has not
been connected to the control module,
terminal a will have to be bridged.
The lighting can still be operated as
usual via the controls on the cooker
hood.