Island-Mounted Cooker Hood - Miele DSM 400 Operation & Installation

Island-mounted cooker hood

^ Disconnect the cooker hood from the
mains supply by
– switching it off at the wall socket
and removing the plug; or
– withdrawing the fuse from the fused
spur connection unit; or
– withdrawing the mains fuse; or
– removing the screw-out fuse (in
countries where this is applicable).
Ensure current is not supplied to the
appliance until after maintenance or
repair work has been carried out.
^ Pull the cover plate downwards.
^ Then connect all components on the
control module as described in
"Electrical connection" and "Wiring
diagram".
^ Push the control module into the
aperture and secure it using the
screws supplied.
^ Connect the control module cable to
the right hand socket in the cooker
hood.
^ Arrange the cable and then re-fit the
cover plate.
^ Then reconnect the cooker hood to
the mains electricity supply.
Installation
21