Installing Cura - WANHAO Duplicator i3 Software User Manual

1.1 Cura
Overview
We recommend that new users start with Cura as it includes a slicing engine. Host software we
recommend to use Repitator. There is separate introduction of Repitator.
Slicers
These programs take the 3-Dimensional model (typically STL/OBJ/etc) and determine the 3D
printer tool path based on the options selected. The slicing engine uses the nozzle diameter,
printing and movement speeds, layer height and other variables to determine the coordinates
where it needs to move and the ratesat which it will do so. This information is exported out of the
program as a gcode file. The gcode file is a plain-text file with a series of text-based codes and a
list of the complete X,Y and Z axis coordinates used for printing the 3D model. We recommend
that new users start with Cura as it includes the printer host as well.
Setup Cura
Cura is available for download on our website
athttp://www.wanhao3dprinter.com/Down/ShowArticle.asp?ArticleID=56When installing, it
is recommended to uninstall any previous versions of Cura you may have been using. When first
opening Cura, you will be prompted to go through the First run wizard. This will consist of
selecting your printer. It is important to select the correct printer, as Cura uses custom profiles
and machines settings based upon which printer you are running.

1.2 Installing Cura

Download Cura From our website and run the exe file The very First screen you will get is to
choose the file location choose the location and press next as shown below:
CURA WANHAO EDITION USER MANUEL REV.B 1 / 23