Advertisement
Controls
VCR's Display
7 Toe
Start point: Turn the TV set on and select the
video programme number (described on page 11).
Insert a cassette.
Note: Be sure to check that the safety tab is not
missing. If it is removed, the VCR is set to the
playback mode automatically.
Select the programmeto be recorded by pressing
the PROG 4/v¥ button or two number buttons.
See the "NICAM"display on page 44 and the table
on page 28 for NICAM.
PROG a/v
PAUSE
REC
DISP
O-@
SP/LP
recording speed
Press the DISP button.
The on-screen display will appear on the TV
screen.
Press the SP/LP buttonto select the recording
speed (SP or LP).
REC
Press the REC button.
Now, recording starts.
Notes:
* When a cassette without a safety tab is inserted,
"Tat," will flash in the VCR display for several
secondsand the cassette will be ejected
automatically.
* When you press the REC button and a cassette
has not been inserted, the "7 45" will flash in
the VCR display to warn you.
If you want to avoid recording unwanted material,
press the PAUSE button. Press the button again
to continue recording.
To prevent tape damage, the VCR will
automatically switch from record/pause to the stop
mode after about 5 minutes.
26
Advertisement
