Huawei IVS1800 User Manual page 12

IVS1800 Video Management System
User Manual
Name
Power button
Reset button
Power cable
port
Power switch
Table 2-4 Indicator description
Name
Network port ACT indicator
Network port LINK indicator
Power-on/off status indicator
Issue 02 (2021-01-27)
Type Function
- Powers on or off the service software.
● After the power switch of the device is turned on,
the device automatically enters the running state.
You do not need to press the power button.
● When the power switch is turned on, you can
press the power button and hold it down for 10s
to enter the standby mode. If you press the power
button again, the device enters the running state.
When the device is in standby mode, the power
button indicator is steady blue. When the device
is running, the power button indicator is off.
- ● Hold down this button for 1s to reset the system.
● Hold down this button for 10s to restore the
device to factory defaults.
- Connects the power supply.
- Powers on or off the device.
Copyright © Huawei Technologies Co., Ltd.
Status Description
● Off: No data is being transmitted.
● Blinking: Data is being transmitted.
● Steady on: The network port is
connected properly.
● Off: The network port is not
connected.
● Steady on: The service software is
running.
● Off: The service software is not
started.
2 IVS1800 Overview
7