Dimmer; Switching Preout; News Bulletin With Timeout Setting; Local Seek - Kenwood KDC-M6024/G Instruction Manual

Function of the KDC-M6024G/KDC-M6024/KDC-V6524/KDC-6024

Dimmer

Dimming this unit's display automatically when the vehicle light
switch is turned ON.
Display
"Dimmer ON"
"Dimmer OFF"
Function of the KDC-M6024G/KDC-M6024/KDC-V6524/KDC-6024
Switching preout <In Standby mode>
Switching the preout between the rear and non-fading. (In non-
fading it outputs without effect from the fader control.)
Display
"SWPRE Rear"
"SWPRE N-Fad"

News Bulletin with Timeout Setting

It switches automatically when a news bulletin starts even if the
radio isn't being listened to. Also, the time interval when
interrupt is prohibited can be set.
Display and Setting
"NEWS OFF"
"NEWS 00MIN"/ "NEWS 00M"
"NEWS 90MIN"/ "NEWS 90M"
When "NEWS 00MIN"/ "NEWS 00M" — "NEWS 90MIN"/ "NEWS
90M" is set, the News Bulletin Interrupt function is ON.
Setting
The display dims.
The display doesn't dim.
Setting
Rear preout.
Non-fading preout.
— 27 —
When it's ON, the "NEWS" indicator is ON.
When the news bulletin starts, "NEWS" is displayed, and it
switches to the news bulletin.
• If you choose the "20MIN"/ "20M" setting, further news bulletins
will not be received for 20 minutes once the first news bulletin is
received.
• The news bulletin volume is the same level that was set for
<Traffic Information> (page 16).
• This function is only available if the desired station sends PTY-code
for news bulletin or belongs to <Enhanced Other Network>-
Network sending PTY-code for news bulletin.
• When the News Bulletin Interrupt function is ON, it switches to an
FM station.

Local Seek

Only stations whose reception is good are searched for in auto
seek tuning.
Display
"Local.S OFF"/ "LO.S OFF"
"Local.S ON"/ "LO.S ON"

Tuning Mode

Sets the tuning mode.
Tuning mode Display
Auto seek "Auto 1"/
"AUTO 1"
Preset station seek "Auto 2"/
"AUTO 2"
Manual "Manual"/
"MANUAL"
<In Tuner mode>
Setting
The local seek function is OFF.
The local seek function is ON.
<In Tuner mode>
Operation
Automatic search for a station.
Search in order of the stations
in the Preset memory.
Normal manual tuning control.